1.937.382.1191 Internet www.ferno.com all OTher lOCaTiOns For assistance or information, please contact your Ferno distributor. If you do not have a Ferno distributor, please contact Ferno Customer Relations: Ferno-Washington, Inc. Serial Number _________________________ 70 Weil Way Wilmington, Ohio 45177-9371, U.S.A.
Model 102 Folding Operating Table Table OF COnTenTs section Page section Page Ferno Customer Relations ______________________ 2 4.2 General Guidelines for Use _________________ 8 Ferno Technical Support _______________________ 2 4.3 Swivel Locks ____________________________ 8 1 - Safety Information ___________________________ 4 4.4 Adjusting the Height of the Table Top ________ 9...
The symbols defined below are used on the table and in which, if not avoided, could result in injury or death. this users’ manual. Ferno uses symbols recognized by the International Standards Organization (ISO), American National Standards Institute (ANSI) and the mortuary Warning services industry.
Model 102 Folding Operating Table Safety Information, Skills and Training 1.5 safety and instruction labels Safety and instruction labels place important information from the users’ manual on the table. Read and follow label instructions. Replace worn or damaged labels immediately. New labels are available from EMSAR (page 13) or from your distributor.
3 - abOUT The Table 3.1 Description Warning The Model 102 Folding Operating Table (called the table improper use of the table can cause injury. Use in this manual) is a mortuary-service product designed to the table only for the purpose described in this provide an adjustable surface for embalming, transfer, and manual.
Using the Table Model 102 Folding Operating Table 4 - Using The Table 4.1 before Placing the Table in service Warning Personnel who will work with the table need to read this ● improper operation can cause injury. Operate manual.
Model 102 Folding Operating Table Using the Table 4.4 adjusting the height of the Table Top The table top is adjustable between seven level positions. Each end of the table can be adjusted independently. To tilt the table top, raise one end of the table higher than the other.
Using the Table Model 102 Folding Operating Table 4.5 Unfolding the Table legs Place the table on its side. braces until the upper and lower braces are aligned and the hinges lock (Figure 6). Slide the leg clip off the leg crossbar (Figure 5).
When using maintenance products, follow the manufacturers’ Minimum directions and read the manufacturers’ material safety data Maintenance intervals sheets. You can purchase a recommended disinfectant from your Ferno distributor or Ferno Customer Relations (page 2). • Disinfecting (this page) 5.2 Disinfecting and Cleaning •...
Ratchet control bar spring Do not lubricate 6 - aCCessOries anD relaTeD PrODUCTs Ferno offers a full line of mortuary service accessories Warning and products. Always follow the instructions packed with accessories. Keep the instructions with this manual. Be...
Modifying the table can cause injury and damage. Use the table only as designed by Ferno. 7.2 Worldwide To order Ferno parts and for professional repair, contact your Ferno distributor. Your distributor is the only agent authorized by Ferno to manage, service, and repair Ferno products.
Need help?
Do you have a question about the 102 and is the answer not in the manual?
Questions and answers