Page 1
Interactive Touch All-in-one User Manual Please read this manual very carefully before using, And keep it properly for any further reference. Take down the model number for reference. Model No.: Series No.: ____________________ All rights are reserved by our company. If there is any change, it is subject to material product without any prior notice.
Safety warning: For your safety, please read the notes below very carefully before using and keep it properly for any reference. Put the equipment in the well-ventilated environment. Don’t put materials such as newspaper, table cloth and curtain above the air hole of the equipment.
Page 3
The terminal with is dangerous. While connecting this terminal to outer lead, make sure to ask professionals to do this job. Or use existing down-lead and flexible cord to finish the connection. Don’t put the battery (battery pack or assembled battery) in the environment such as sunshine and hot fire.
Products using important notes (1)Important Notes of moving the all in one PC (5)Do not repair, modify or disassemble the product, please Please make sure the unplug the plug from power wait for the maintenance technicians’ check and repair socket when moving the machine, and disconnect antenna, audio/video cables, and any fixed cables ...
The product functions and features Touch function Built-one touch function, touch operation can be carried out directly on the screen. TV function Multilingual menu. Full-function infrared remote control. Full-channel auto-tuning. AV (video), YPBPR (component), PC (computer) and digital HDMI, USB interface. Support SDTV and HDTV modes (480i / 480p, 576i / 576p, 720p, 1080i / 1080p).
Page 7
3. Video has a very clear 4K or 3D and other special effects. Part of PC applies the modular design, all internal wiring; PC modules overall swap, easy maintenance. Slim, stylish and lightweight. Ultra-low standby power design, with automatic power saving feature. Common port at front, signal access automatic switching.
Graphic appearance and connection instructions The indicator of PC will have no function, because some models are without PC built-in. PC Interface Interface on front frame Please note the distinctions, because USB-Host and USB-Touch have same look and shape.
Remote control description Replacement of remote control battery Open the battery back cover of the remote control; Slide the back cover along the direction of arrow. Installation response positive and negative installation specifications AAA batteries, to ensure positive and negative corresponding, please don’t mix the new and old battery.
Control range Around 8 m distance from the remote control receiver, 30 degrees within the scope of left and right side, the remote control can work normally. Notice Pay attention to the following matters when using remote control: Open the remote control’s back cover of the battery, and then put two no.7 batteries into the battery box finally closed the battery cover.
Page 13
All-in-one shutdown All-in-one can be via a key operation to achieve TV and PC shutdown, process is as follows: The initial state after press the POWER button (a button off) PC shutdown TV boot PC boot PC, TV boot PC off then TV and then shut down C boot, TV shutdown PC unchanged, TV boot...
Connections and settings Distance Sensing There is a distance sensor built-in front control panel. The Interactive LED touch screen will be turned off automatically once there is anything blocked distance sensor about 5 to 15 cm for 20-25 seconds. This function is mainly designed for educational application. Generally the Interactive LED touch screen will be placed behind the push-draw blackboard.
Page 15
External computer is connected to all-in-one Through the front port Use an HDMI cable to connect the external computer to the all-in-one’s front HDMI port. One using a USB cable to the front USB-Touch port to connect to an external computer's USB port. ...
Page 16
Audio and video devices connections AV in Using the AV cable to connect audio and video devices with AV output function, yellow for video, red for the right channel, white for the left channel. After connected cables, open all-in-one and audio and video devices. ...
Page 17
Audio output Connect headphones or other audio devices to all-in-one’s audio output (headphone output) port. After connected the cable, turn on all-in-one and external audio and video devices. Coaxial output Use a coaxial cable to connect the coaxial output to the audio device with coaxial input function. ...
Page 18
Note: Only in AV IN or TV channel, AV has output. TV board AV output requires the use of 3.5mm AV adapter cable. TV antenna connection Connect the antenna or cable TV line to the TV's RF port. ...
HDMI, it can only simultaneously connect one way of external display device. Menu operation Enter the menu ◄► In TV mode, press the Menu button to display the channel, video, sound, time, setting, lock. Press the" " key in the movement between the sub-menu items (highlighted) to select the desired menu item. Press"▲▼" or" ◄►...
Page 20
Manual search Manual Search Press "▲▼" to select manual search, press the "confirm" Storage Channel key to enter Manual Search. Sound System DK In the pop-up window, press "▲▼" to select the setting ◄► The current channel item, press the " "...
Page 21
◄► Press "▲▼" button to select the color temperature, press the "confirm" key to enter the selection menu, press " " to select, press the Menu key to exit. Zoom Mode ◄► Press "▲▼" button to select the zoom mode, press the "confirm" key to enter the selection menu, press " "...
Page 22
◄► Press "▲▼" button to select 10KHz, press " " to set, press the Menu key to return. Balance ◄► Press "▲▼" button to select the balance, press the " " key to set; press the Menu key to return. Automatic volume Press "▲▼"...
Page 23
Power-saving mode Press "▲▼" button to select the power-saving mode, press the "confirm" key to set, there are three states of high, medium and low, screen brightness will be a corresponding change. Reset ◄► When you select "Reset", press "confirm" key and prompt if confirm or not? press " "...
Page 24
Normal_2d: The 2D movies into 3D movie playback. Press "Menu" key to return to the setup menu page. Press the "Return" key to exit the menu operations. 3D settings Press "▲▼" to enter 3D mode selection, the user can modify the settings according to personal preference.
Page 25
◄► Press " "key to switch among pictures, music, movies and text, press the Enter key to enter. Picture play Insert the USB storage device into the USB port. Enter the "Picture", select C, press "OK" to enter the sub-menu. Press "◄►"...
Page 26
pause in the menu at the lower screen to operate play and other functions. Press the "Exit" button to exit. Movie player Insert the USB storage device into the USB port. Enter the "movie", select C, press "OK" to enter the sub-menu.
Installation & Using of touch screen software (Ⅰ)Setup Load the attached disk into CD-ROM Double-click to run “TouchDevSetup.exe” i n the disc. Complete installation accordingly. Click “ Finish ” and run touch screen management application “Fitouch.exe”. The installation will be completed till to shows up at right corner of desk top。...
Page 28
About: show some information of TouchDev. Exit: close TouchDev. Calibration: Normal calibration standards: As showed in the left picture, there are “custom made” and “advanced” for calibration. If the two options are not selected, it is normal model of calibration. This model fits for the case of connecting only one piece of electronic white board.
Page 29
2)matching between two pieces of screen: Referring that the screen is cut into two pieces, with separate performance on both pieces at the same time, and both pieces of screen all need touch screen. In this case, it need two times of positioning, the first time is on the left, and the second is on the right.
(Ⅲ)Basic operation General The customer could realize the following operations on the screen: operation Click------object on the screen Double click------click the same object twice quickly on the same screen Drag------press the object and drag it Right key------press the object and remain for 2-3 second ...
Touch screen size Touch technology Non-contact infrared sensor technology Sensing objects Opaque objects (such as a finger, pen, etc.) ≥ Ø5mm Effective Touch Size Multi-point support 2, 4 points Response time Single-point mode: Click: 13ms continuous: 3ms Multi-point mode: Click: 13ms continuous: 5-10ms Two points simultaneous touch: Continuous 10ms Cursor speed Up to 300 points / second...
Page 32
Built in PC pattern (1) Signal without full screen or beyond the scope. Check the resolution whether it is the best resolution. Check the image zooming mode whether it is correct. (2) Image shift. In the menu image set to select automatic calibration. (3) Image miss color, incorrect color.
Maintenance Proper maintenance can prevent much early failure; regular cleaning can avoid affecting normal use, also influence display and perfect appearance. Clean screen Using a soft cloth to gently wipe the dust on the screen. Avoid larger strength to repeated cleaning .In order to avoid scratches or damage glass. ...