IMPORTANT SAFEGUARDS READ ALL INSTRUCTIONS BEFORE USING 1. Do not touch hot surfaces. Use handles and knobs when available. 2. This appliance must be properly installed and located in accordance with these instructions before it is used. 3. The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electrical shock or injury to persons.
Page 3
CAUTIONS: 1. There are extremely hot coffee beans in the glass roast chamber during the roast process. To avoid risk of injury, do not lift handle or remove chaff basket during roasting process. 2. Always keep the roaster in upright position to avoid potential to avoid potential injury and/or damage to your roaster.
Page 4
SAVE THESE INSTRUCTIONS, THIS PRODUCT IS FOR HOUSEHOLD USE ONLY SHORT CORD INSTRUCTIONS: . 1 A short power supply cord is provided to reduce the risk of becoming entangled in or tripping over a longer cord. 2.Longer detachable power-supply cords or extension cords are available and may be used if care is exercised in their use.
Warranty Information 1 Year Limited Warranty only in North America Fresh Beans Inc. warrants that for a period of one year from the date of purchase, this product will be free from defects in material and workmanship. Fresh Beans Inc. at its option will repair or replace this product or any component of the product found to be defective during the warranty period.
Page 6
Roasting Coffee Beans: Your Fresh Roast SR540 coffee bean roaster is designed to roast approximately 4 ounces 114 Grams. Fill the provided 43CC measuring cup 4 times. Never overfill with green beans.
Page 7
Reset Factory Default Settings: Plug machine into an outlet. Press “On/Off” button. Press “ADJUST” button to set FAN, POWER, and TIME. Press “Run/Cool” button to save new default setting. *Default settings are only for start up and will need to be adjusted during roast. Cleaning and Care: Before every use, always empty the Chaff* Basket and clean the Top Cap screen.
Need help?
Do you have a question about the Fresh Roast SR540 and is the answer not in the manual?
Questions and answers