Wurlitzer 3020 Service Instructions And Parts Catalog page 33

Parts Catalog
PARTS
CATALOC
j
INTRODUCTION
This catalog has
b~en
compiled to simplify
the ordering of parts for the Models
3020
Wall-
box, 219 Impulse Stepper,
215
Impulse Trans-
mitter and
216
Impulse Receiver. Its primary
purpose is to give the name and part number
of each part and to clearly indicate them as-
sembled in their position.
To accomplish .this, Exploded Views have been
used entirely. Assemblies have been "pulled
apart" in such a manner that each item is illus-
trated independently without losing its identity
in relation to the complete assembly.
The catalog is arranged in Sectioos as indi-
cated in the table of contents. This is done to
group all related assemblies. The Alphabetical
List of Illustrations directly below the table of
contents is provided to aid in locating parts.
To find the number of a part, de_termine its
FILL IN PARTS
ORDERS PROPERLY
function in the main assembly of which it is a
sub-assembly. Locate the figure on which this
main assembly is illustrated by referring to the
Alphabetical List of Illustrations. If the part
is not shown on the figure it is not obtainable
and must be procured by purchasing the as-
sembly. Parts of rivet and weld
assembl~es
have
not been listed as such parts are not obtainable.
When ordering, make sure that the part number
which you select includes the entire assembly
that you need. It may be necessary to order two
or more _ _ parts to complete the assembly that
you requtre.
Mter
determining the proper part name and
number, fill . out the parts orders correctly and
completely. This will avoid delay caused by
misunderstood orders and permit prompt and
efficient service.
Milton A. Bartels
General Service Manager
Rudolph _ Wurlitzer Company
North Tonawanda, New York
BE SURE TO INCLUDE:
1.
Part N umbex
2. Instrument Model Number
3. Part Name
4. Quantity
5. Authorized Signature