Shared lock functionality --------------------------------------------- 22 Create a LockSmart account ----------------------------------------- 7 Activity log ---------------------------------------------------------------- 23 Log in with a LockSmart account ----------------------------------- 7 Transferring a lock to a new owner ------------------------------- 24 Add a lock ------------------------------------------------------------------ 8 Sharing a pin code ----------------------------------------------------- 25...
Getting started Installation guidance & Locksmart Abode Before installation Check: Door thickness must be 38-55mm, Door frame ≥110mm Check: Use the grub screw Lock stem located on the lock stem assembly and reposition the handle to suit your door Grub screw position.
Page 4
Getting started Installation process Step 1: Drill two holes with the template using a 10mm drill Step 2: Install the lock latch (E) using supplied screws (H). (Suits Australian standard door latch sizing) Step 3: Install the front lock panel (A) with the rubber gasket (C2) and fix them with screws (F) through the Step 4: Thread cable through centre hole and connect to and gasket (C1) and backplate (D)
Open the App Store on your iOS or Android device* 2. Go to search and type in ‘LockSmart’ 3. Select LockSmart from the search results and install the application Sign in with Facebook To log in with your Facebook account, press ‘Sign in with Facebook’...
4. Press ‘Create Account’ to create your account Log in with a LockSmart account To log in with your LockSmart account, press the ‘Have an account? Sign in’ button on the home screen 2. Enter your user name and password...
Getting started Add a lock Ensure you have Bluetooth NB If you wish to transfer enabled on your device ownership of the lock from one user to another, please 2. Ensure lock is in range (5m) see the ‘Transferring a lock 3.
Getting started Options menu Logging out of the app Open the options menu by pressing the three buttons in the top right section of the ‘Locks’ list screen 2. Press ‘Sign Out’ 3. All of your personal and lock information will be removed from your device until you sign in again...
Getting started Setting up Wi-Fi Bridge Press the button For Siri voice activation and other Wi-Fi features, you require on the Wi-Fi Bridge wall unit the Wi-fi Bridge (purchased separately to be paired to your door lock). Enable Wi-Fi bridge from the settings menu for your lock 2.
Unlocking Tap to unlock Ensure you have already enabled Tap to unlock authentication from the settings menu for your lock 2. Ensure you have Bluetooth enabled and the lock is within 5m of your device 3. Choose the lock from the lock list screen 4.
Unlocking Touch ID / Fingerprint Available on compatible mobile devices Ensure your device has been previously configured to enable Touch ID (on iOS devices) or Fingerprint (on Android devices) 2. Ensure you have Bluetooth enabled and the lock is within 5m of your device 3.
Unlocking Passcode Ensure you have already 2. Ensure you have Bluetooth enabled Passcode enabled and the lock is within authentication from the 5m of your device settings menu for your lock 3. Choose the lock from the lock Once enabled, you will list screen be required to enter this 4.
Unlocking Face unlock Available on compatible mobile devices Ensure your device has been previously configured to enable Face Unlock 2. Ensure you have already enabled Face Unlock authentication from the settings menu for your lock 3. Ensure you have Bluetooth enabled and that the lock is within 5m of your device 4.
NB Lock must already be paired to your account Ensure your Apple Watch is paired to your mobile device 2. Ensure your paired device has the latest version of LockSmart downloaded. Go to the app store to update if not downloaded 3.
Unlocking Auto unlock Ensure you have already enabled Auto Unlock from the settings menu for your lock 2. Ensure you have already enabled Location Services on your mobile device 3. Ensure you have Bluetooth enabled on your mobile device 4. When you approach lock within 5m of your device, it will automatically unlock...
Unlocking RFID Before first use, pair RFID with lock by a) Selecting Add RFID within settings menu for your lock followed by b) Swiping card in front of lock keypad on prompt 2. Swipe the card on the front of the lock to unlock NB To remove card, click the ‘X’...
Unlocking Key pad pin code Before first use, set Key Pad Pin Code from the settings menu for your lock by entering the pin code into the app as prompted. Pin codes can be unlimited or limited by time or use 2.
Unlocking Physical key For peace of mind, the LockSmart door locks have a back-up physical key For the LockSmart Abode Use the supplied allen key to undo the grub screw holding the handle in place. Remove the handle. Key barrel is located...
Finding and sharing Share a lock with someone else Each LockSmart lock can be shared with 5. Your device’s native SMS up to 50 users messaging application will be opened with an editable invitation Choose any lock from the lock message to send to the invited list screen and press the ‘Share’...
Finding and sharing Scheduled access for shared users Choose ‘Scheduled’ as the range of access time access level when adding a during the week, which shared user (see page 21) will be repeated every week 2. The ‘Timezone’ selected Weekly Until on the ‘Invite New User’...
Finding and sharing Shared lock functionality Shared users will be able to view the photo of the lock if the owner has set one 2. Shared users will not have access to the lock’s settings, activity log, location and will not be able to invite other users 3.
Finding and sharing Activity log Choose any lock from the lock list screen 2. Press the ‘Activity Log’ option from the bottom menu of the unlock screen 3. This screen shows a list of unlock activities for any time a shared user unlocks the lock (as described in the Shared Lock Functionality section on page...
Finding and sharing Transferring a lock to a new owner Each lock can only be owned by a single primary user. To transfer the ownership of the lock, you have to remove it from your account first. Ensure you are online and connected to the Internet 2.
Finding and sharing Sharing a pin code Choose any lock from the lock list screen and press the ‘Settings’ option in the bottom menu 2. Select lock pincode 3. Select contact it to forward 4. An SMS message will be generated. Click send to deliver the pin code to the contact.
Other features Notifications Choose any lock from the lock list screen 2. Press the ‘Settings’ option from the bottom menu 3. Under the ‘Notifications’ section, toggle on or off the following notification options: 4. ‘Battery Level’: with this option enabled, you will receive a notification upon connecting to your lock when the battery level has dropped below 50%, 10%, and 5%...
Other features Modify account or password Modify your account details, change 6. Press the ‘Save’ button in your password, and more the top right to save your password changes To access Account Settings, press the three buttons on Under the Notifications the top right of the screen on section, ‘Shared lock status the ‘Locks’...
• In order to immediately protect your 4. Press the delete button account, login with your LockSmart 5. Add the lock to your device again username and password on another as per the ‘Add a lock’ section on compatible device page 8.
Page 28
Other features For shared user(s) If the lost phone is a shared user of the lock, the owner only has to remove the shared user from having access to the lock to secure. The owner should: Choose the lock from the lock list screen 2.
Other features Add a photo to a lock Choose any lock from the lock list screen 2. Press the ‘Settings’ option from the bottom menu 3. Press the ‘Add Photo’ button 4. You can choose a photo from your device’s gallery or take a new picture with your camera 5.
Other features Battery percentage display My Front Door Choose any lock from the lock list screen 2. You will see the battery level percentage displayed at the top of the screen for the lock 3. The battery level is updated every time the application connects to direct to the lock.
In the event batteries run completely flat: For the LockSmart Abode Use the key back-up. See page 19 for key access or 2. USB jumpstart the power. Plug in any standard micro USB cable to the port which is located on the underside of the front lock and connect to a power source such as a power bank or laptop.
Other features Serial number & firmware version Choose any lock from the lock list screen 2. Press the ‘Settings’ option from the bottom menu 3. The lock’s unique serial number and current firmware version number are located at the bottom of the settings screen (firmware version is only displayed when the lock is powered on and connected to your device) 4.
Lock ID & Maintenance Firmware upgrade Upon connecting to a lock, the application will detect if there is a new version of the LockSmart firmware available for the device 2. If a new firmware is available, follow the prompts to upgrade your lock 3.
Lock ID & Maintenance C1 & C2 Replacing your batteries LockSmart Abode Remove battery cover on the rear side of the lock by pushing upwards on cover. Replace with 4 x AA Alkaline batteries and return cover in place G x2 H x2...
Lock ID & Maintenance Lock care Your LockSmart door locks require very little maintenance. Replace the batteries upon app prompt the batteries are running low. If the latches become sticky, please lubricate using graphite powder.
Need help?
Do you have a question about the LOCKSMART and is the answer not in the manual?
Questions and answers