Page 1
Nitro Valves Nitro installation instructions………………………………2 Instrucciones para instalar el Nitro………………………4 Istruzioni per l’installazione Nitro…………………………6 Installation pour l’installation des vannes Nitro…………8 Installationsanleitung fur die ventile Nitro………………10 Instrucoes para instalar Nitro……………………………12 Nitro performance information……………………………14 N-100SF N-100 N-100S N-100MB N-100F N-100MBF...
Page 2
NITRO VALVE INSTALLATION AND OPERATION Important: Flush the supply lines completely before installing valves. A. For threaded models wrap male adapters with 2 wraps of Teflon tape and thread the adapters into the valve inlet and outlet 1 turn past hand tight.
Page 3
Check voltage across the solenoid lead wires for minimum 21 VAC. If the valve still does not operate electrically replace the solenoid with a Weathermatic model M24E solenoid. Insure the manual bleed lever is in the closed Valve will not close position.