Advertisement
Installation
● Correctly perform the installation work referred to in this manual.
If the installation is not completed correctly, there may be an injury as a result of the motion sensor kit
falling.
● Do not install the motion sensor kit where flammable gases may generate or enter.
● Turn OFF the power supply completely before performing the installation and electrical wiring work for
the motion sensor kit. Not doing so may cause an electric shock.
Electrical Work
● Correctly perform the electrical wiring work.
If the electrical work is not completed correctly, heat generation at the connection, a fire or an electric
shock may occur.
● Make sure that the electrical wires are secured so that an external force is not applied to the terminal
connections. Failure to properly secure electrical wiring could result in excessive heat or fire.
● Turn OFF the power supply completely before performing the installation and electrical wiring work for
the motion sensor kit. Not doing so may cause an electric shock.
2.
Before Installation Work
Check to ensure that the following accessories are packed with the motion sensor kit.
No.
Motion Sensor Kit
1
Connecting Cable
2
3
Wiring Cover
Cable Clamp
4
Securing Screw
5
Installation Manual
6
Accessory
3P
5P
3
Q'ty
Remarks
1
with Connecting Cable
1
1
for Protection of Relay Connector
for Securing Connecting Cable and
3
Wiring Cover
2
for Securing Motion Sensor Kit
1
-
-
Advertisement
