Table of Contents
Advertisement
1.
This reflux still should include all the components show in the image above.
2.
When the still arrives it will arrive in a few separate parts that you will need to
assemble. Its important that you assemble these components carefully and we
recommend using Teflon tap on
the threaded fittings.
3.
Use Teflon tap to cover the
thread of the ball valve then
screw it into the side of the still
body. See pictures to right. No
need to use a spanner. Just
finger tight is fine here. Over
tightening might damage the
thread.
4.
Next get some Teflon tap and
attach the Teflon tape to the
thread of the flow control
device. Then screw this into
the ball valve as shown in the
picture to the right.
Advertisement
Table of Contents
