Making A Aux Connection; Charging - Tech.Inc TI3194 User Manual

Making a AUX Connection

Once the TI3194 speaker is powered on you can proceed
to establishing an AUX connection between your speaker
and external device. To make an AUX connection insert
the supplied AUX cable into the rear AUX input on the
speaker and the selected external device.
（1）Volume control is functional in AUX mode.
Play/Pause is not functional or synchronized with
connected devices.

Charging

To charge the TI3194 Speaker please use the power
supply supplied. Any other power supplies used with this
device may damage the speaker.
To charge the device connect the adapter to the speaker
and adapter to the suitable AC outlet.
When charging has been established the power ON/OFF
key will fade in and out (breathe) a red light. When the
speaker is fully charged the red light will remain solid red.
- 10 -