Summary of Contents for AOMWAY Commander V1S
- Page 1 AOMWAY 1 VISION SYSTEMS AOMWAY FPV Goggles Commander V1S User Manual ...
-
Page 2: Specifications
AOMWAY 2 VISION SYSTEMS 1. INTRODUCTION: Commander V1S goggles is well‐equipped with a pair of 16 to 9 ... - Page 3 AOMWAY 3 VISION SYSTEMS Interpupillary Distance (IPD): 59‐69mm (Adjustable) ...
- Page 4 AOMWAY 4 VISION SYSTEMS Auto Scan: One key starts auto search active channel within 6CH at high speed ...
-
Page 5: Vision Systems
AOMWAY 5 VISION SYSTEMS At a place that is full of dirt and dust; At a place that easy to contact water such as raining ... - Page 6 AOMWAY 6 VISION SYSTEMS 3. ACCESSORIES: 1 x Carry Case 1 x AV cable ...
- Page 7 AOMWAY 7 VISION SYSTEMS Key ②（5 way joy switch on right side）: DVR recording (analog only not for HD recording) ...
- Page 8 AOMWAY 8 VISION SYSTEMS 1) Press down at center: short press to select display mode ...
-
Page 9: Operation
AOMWAY 9 VISION SYSTEMS Port ⑥ : Earphone port， support 3.5mm 3‐pole earphone jack; ... -
Page 10: Head Tracker
AOMWAY 10 VISION SYSTEMS DVR is only used for analog recording under RF/ AV in ... -
Page 11: High Definition Multimedia Interface
AOMWAY 11 VISION SYSTEMS (Please refer to your radio controller’s user manual) Head tracking data cable: Turnigy 9X Radio Futaba Radio ... - Page 12 AOMWAY 12 VISION SYSTEMS Note: 1) Most HD display problem is caused by cable or ...
-
Page 13: Power Supply
AOMWAY 13 VISION SYSTEMS 10. POWER SUPPLY: The goggles come with 5.5*2.1mm DC barrel connector (inner ... - Page 14 AOMWAY 14 VISION SYSTEMS 1. Make sure power supply to the goggles is normal; 2. Verify if the goggles’ channel frequency is the same as ...
- Page 15 AOMWAY 15 VISION SYSTEMS channel frequency; 5. The goggles and transmitter should be used in a wide ...
Need help?
Do you have a question about the Commander V1S and is the answer not in the manual?
Questions and answers