Summary of Contents for Stoney Point Machine SPM 5400
- Page 1 Stoney Point Machine Disc Mower Caddy SPM 5400 SPM 5410 SPM 5415 Operator's Manual & Parts Manual 467298 Highway 51, Stilwell, OK | Phone: 918-696-6090 | Fax: 918-696-3106 stoneypointmachine@gmail.com | www.stoneypointmachine.com...
- Page 2 ATTENTION BECOME ALERT! OPERATING SAFETY To prevent possible injury to bystanders or the operator, this caddy is not intended tor roadside • or municipal use. The caddy is intended for agricultural use only? Always shut off tractor engine, disengage PTO, shift to park position (or shift to neutral), set •...
- Page 3 Detach and store mower where children do not normally play. • Stoney Point Machine always take operator safety into consideration and guards exposed moving parts for operator protection. However, some areas cannot be guarded or shielded in order to assure proper operations.
- Page 5 MOUNTING THE CADDY TO THE TRACTOR 1. Attach the tongue/pull hitch to the tractor's drawbar. 2. Attach the PTO shaft to the caddy and to the tractor's 540 RPM PTO, making sure that these connections are very secure. 3. Check the PTO shaft with the tractor and caddy at it's most closed position, the shaft should never be completely compressed.
- Page 6 ATTACHING THE MOWER TO THE CADDY 1. Position mower to allow clearance outside of wheel. 2. Attach the lift arms and re-tighten the clamping bolts 3. Attach upper link and adjust for proper mowing angles (follow mower manufacturers guidelines) 4. Adjust the ratchet jack to place the mower at the recommended working height (NOTE: if your mower requires a 3 pt lift cylinder, use of cylinder stops will be required) 5.
Need help?
Do you have a question about the SPM 5400 and is the answer not in the manual?
Questions and answers