Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Ovislink Manuals
  4. Telephone
  5. OVDP161-SI
  6. Quick user manual

Ovislink OVDP161-SI Quick User Manual

Call center dial pad telephone
Hide thumbs
1
2
3
4
5
6

Advertisement

Quick Links

Download this manual
Call Center Dial Pad telephone Quick User Guide
Connection and setup:
1. Connect the "TEL" port to the telephone line.
If you use regular telephone line; it will be the wall telephone jack, similar to the one shown in
the picture below:
If you use an IP phone line; such as Vonage, RingCentral, Ooma Office or a cable company, it
will be the phone port on the adapter from the service provider.
OvisLink
Page 1 of 6
OvisLink Product Document

Advertisement

loading

Summary of Contents for Ovislink OVDP161-SI

  • Page 1 OvisLink Product Document OvisLink Call Center Dial Pad telephone Quick User Guide Connection and setup: 1. Connect the “TEL” port to the telephone line. If you use regular telephone line; it will be the wall telephone jack, similar to the one shown in the picture below: If you use an IP phone line;...
  • Page 2 OvisLink Product Document 2. Connect the “Headset” port with an OvisLink headset (with blue color at the RJ9 connector) 3. Turn the “Mode” switch to “T” position for touch tone mode. 4. Set “Ring” switch as you need: H- Loud ring tone, L- low ring tone, A- Auto answer incoming calls.
  • Page 3 OvisLink Product Document 5. Adjust “SPK-VOL” for the headset’s speaker volume 6. Adjust “MIC-VOL” for the headset’s microphone volume 7. “On/Off” Button This button acts like regular telephone hood. When not using the phone, turn it Off. The LEDs on the top of the phone should be off.

  • Page 4: How To Use The Phone

    OvisLink Product Document How to use the phone Dial out: 1. Press the “On/Off” button to hear dial tone from the headset (the both “Use” LEDs will be on) 2. Dial the telephone number Redial: 1. Press the “On/Off” button to hear dial tone from the headset.
  • Page 5 OvisLink Product Document Answer a call: 1. When there is an incoming call (Ring switch does not set to “A”), the telephone will ring and the “Ring” LED at the top of the phone will blinking, press the “On/Off” button to answer the call.
  • Page 6 OvisLink Product Document To put the call on hold Press the “Pause” button; the call will be on hold. To mute the headset’s microphone when on a call: Press the “Mute” button; the headset’s microphone will be muted when you see LED red light above “Paused”...