INDEX STATEMENT ACCESSORIES SAFETY INSTRUCTION UNDERSTANDING DMX TECHNICAL SPECIFICATION CONTROL SYSTEM CLEANING AND MAINTENANCE www.oppray-light.com ML-W0096 IP65 9×12W six-colour LEDs User Manual...
Installing this fixture in a marine and/or coastal environment may cause corrosion and/or excessive wear to the interior and/or exterior components of the fixture. Damages and/or performance issues resulting from installation in a marine and/or www.oppray-light.com ML-W0096 IP65 9×12W six-colour LEDs User Manual...
Please do not discard the shipping carton in the trash. Please recycle whenever possible. ACCESSORIES These items are packed together with the product: Name Quantity Unit Remark USER MANUAL POWER CABLE www.oppray-light.com ML-W0096 IP65 9×12W six-colour LEDs User Manual...
Those suffering from EPILEPSY should avoid looking directly into the light source of this unit at all times. • Always disconnect from main power source before performing any type of www.oppray-light.com ML-W0096 IP65 9×12W six-colour LEDs User Manual...
Page 6
M10 x 25 mm, also be sure the hardware is insert in the pre-arranged screw holes in the bracket of the fixture. www.oppray-light.com ML-W0096 IP65 9×12W six-colour LEDs User Manual...
Page 7
Never stand directly below the device when mounting, removing or servicing. • Ensure ALL connections and end caps are properly sealed with a dielectric grease (available at most electrical suppliers) to prevent water corrosion and/or electrical short circuit. www.oppray-light.com ML-W0096 IP65 9×12W six-colour LEDs User Manual...
DMX is short for Digital Multiplex. This is a universal protocol used by most lighting and controller manufactures as a form of communication between intelligent fixtures and controllers. DMX allows all makes and models of different www.oppray-light.com ML-W0096 IP65 9×12W six-colour LEDs User Manual...
Page 9
This digital starting address is the channel number from which the fixture starts to “listen” to the digital control information sent out from the DMX controller. The www.oppray-light.com ML-W0096 IP65 9×12W six-colour LEDs User Manual...
CONTROL SYSTEM DISPLAY: MENU To select the programming functions To go forward in the selected functions DOWN To go backward in the selected functions ENTER To confirm the selected functions www.oppray-light.com ML-W0096 IP65 9×12W six-colour LEDs User Manual...
Page 12
To access colour change mode press “MENU” until the display shows CC-- on the LED display. Press “ENTER” to confirm the setting. Use the “UP” and “DOWN” buttons to ajust the speed between CC00 ~ CC99. Press the “ENTER” www.oppray-light.com ML-W0096 IP65 9×12W six-colour LEDs User Manual...
Page 13
To set the master unit, press the “MENU” button on the rear of the master unit to select your desired program (sound active, auto, static colour or colour fade). To set the other units in slave mode, press the “MENU” button on the rear of www.oppray-light.com ML-W0096 IP65 9×12W six-colour LEDs User Manual...
Colour fade in/out 200-255 NO Function 000-255 MACO speed (slow to fast) 000-255 Red (0-100%) 000-255 Green (0-100%) 000-255 Blue (0-100%) 000-255 White (0-100%) 000-255 Amber(0-100%) CH10 000-255 UV(0-100%) CLEANING AND MAINTENANCE www.oppray-light.com ML-W0096 IP65 9×12W six-colour LEDs User Manual...
Page 15
• Inspect all moving parts and make sure there are no signs of wear and rotate/move without imbalances. • Electric power supply cables must not show any damage, material fatigue or www.oppray-light.com ML-W0096 IP65 9×12W six-colour LEDs User Manual...
Page 16
Never remove the ground prong from the power cable. www.oppray-light.com ML-W0096 IP65 9×12W six-colour LEDs User Manual...