Page 1
AURA_1RwT AURA_5RwT www.sukcesgroup.pl In order to fully explore available functions of AURA series please take a moment and read this manual before using the device. AURA transmitters are compatible with all YOODA brand devices. 1. General information 1. Control: can control single motor, or a group of up to 20 motors on each channel 2.
Page 2
1. For channel to work correctly when remote is set to automatic mode, it has to be activated. If automatic mode is chosen for the channel and the channel number is flashing, that means device does not work in this mode. 2.
Page 3
5. Setting current time Time can be set only when device is in manual working mode. Longer than 10 seconds pause between series of button clicks during programming will cause device to switch off from time setting mode without saving any changes. By pressing Press and hold L1 button Using UP and DOWN...
Page 4
Mo Tu We Th Fr AUTO Using UP and DOWN buttons The set minute set minutes.. will appear. Mo Tu We Th Fr Days of week AUTO Press start to flash. L1 button. Mo Tu We Th Fr Sa Su By pressing UP/DOWN button we can set the weekly programator in 4 ways: The set days will appear...