Advertisement
Quick Links
www.sukcesgroup.pl
In order to fully explore available functions of AURA series please take a moment and read this manual before using the device.
AURA transmitters are compatible with all YOODA brand devices.
1. General information
Radio receiver range is a variable value and can differ from declared values depending on conditions in which device
operates. Possible sources of changes in range are building construction, interference caused by other radio transmitters
etc.
2. Detailed description
UP button
Timer
programming button
(L1)/Channel
1-channel transmitter with timer
or 5-channel transmitter with timer
AURA_1RwT
STOP button
DOWN button
Configuration change button
(P1)/Channel +
P2
programming button
(front)
|
AURA_5RwT
1. Control:
can control single motor, or a group
of up to 20 motors on each channel
2. Range:
200 meters outdoor,
35 meters indoor
3. Battery:
CR2430
4. Power supply:
3 V
5. Dimensions:
80 x 80 x 17 mm
6. Transmitting power:
10 mW
7. Operating temperature:
from 0°C to 50°C
8. Protection degree:
IP 30
Illustrations (from the top):
Fig. 1. 5-channel AURA wall-mounted remote control with timer (AURA_5RwT)
Fig. 2.1-channel AURA wall-mounted remote control with timer (AURA_1RwT)
Low battery
message
1
Activaiting days
in automatic mode
Current
Direction movement
work mode
of roller shutter
SU
MO
TU
WE
TH
FR
SA
MAN
AUTO
Actual
Currently supported
time
channel (5RwT only)
LCD display
Advertisement
Summary of Contents for YOODA AURA Series
- Page 1 AURA_1RwT AURA_5RwT www.sukcesgroup.pl In order to fully explore available functions of AURA series please take a moment and read this manual before using the device. AURA transmitters are compatible with all YOODA brand devices. 1. General information 1. Control: can control single motor, or a group of up to 20 motors on each channel 2.
- Page 2 1. For channel to work correctly when remote is set to automatic mode, it has to be activated. If automatic mode is chosen for the channel and the channel number is flashing, that means device does not work in this mode. 2.
- Page 3 5. Setting current time Time can be set only when device is in manual working mode. Longer than 10 seconds pause between series of button clicks during programming will cause device to switch off from time setting mode without saving any changes. By pressing Press and hold L1 button Using UP and DOWN...
- Page 4 Mo Tu We Th Fr AUTO Using UP and DOWN buttons The set minute set minutes.. will appear. Mo Tu We Th Fr Days of week AUTO Press start to flash. L1 button. Mo Tu We Th Fr Sa Su By pressing UP/DOWN button we can set the weekly programator in 4 ways: The set days will appear...