Download Print this page

GMF Ai1 Owner's Manual page 4

Acoustic preamp/di/headphone amp/acoustic interface

Advertisement

 
 
 
 
 
 
 
 
 
 
 
 
9VDC – This unit can run off 9V battery or you can connect a 9V adapter. The adapter must have a barrel 
connector with center negative. The battery may be left in or taken out when using an adapter. (To install or 
replace the 9V battery, simply open the easy access battery door on the bottom of the unit. Always remember 
to unplug your guitar cords from the pedal to conserve battery life. 
 
LINE IN:  (Stereo) This is an input for a CD/Tape player, MP3 player or other equipment with RCA type 
connectors. The signal plugged in here will be heard through all outputs. (OUTPUT, D.I. OUT, LINE OUT, and 
 
HEADPHONE jacks.) The LEVEL control does not affect this signal. Volume level must be controlled at the 
source. 
 
LINE OUT:  (Stereo) This is an output that can be use to patch your acoustic instrument into your home theater 
system to play your instrument without an expensive amplifier, or to patch into any other equipment that 
uses RCA type inputs. 
 
 
 
 
BLOCK DIAGRAM 

Advertisement

loading