LG KF600w User Manual page 115

Devices: Experimental
Techniques", sets forth the first
consistent test methodology for
measuring the rate at which RF is
deposited in the heads of
wireless phone users. The test
method uses a tissue-simulating
model of the human head.
Standardized SAR test
methodology is expected to
greatly improve the consistency
of measurements made at
different laboratories on the same
phone. SAR is the measurement
of the amount of energy absorbed
in tissue, either by the whole
body or a small part of the body. It
is measured in watts/kg (or
milliwatts/g) of matter. This
measurement is used to
determine whether a wireless
phone complies with safety
guidelines.
9. What steps can I take to
reduce my exposure to Radio
Frequency energy from my
wireless phone?
If there is a risk from these
products — and at this point we
do not know that there is — it is
probably very small. But if you are
concerned about avoiding even
potential risks, you can take a
few simple steps to minimize your
exposure to Radio Frequency (RF)
energy. Since time is a key factor
in how much exposure a person
receives, reducing the amount of
time spent using a wireless
phone will reduce RF exposure. If
you must conduct extended
conversations by wireless phone
every day, you could place more
distance between your body and
the source of the RF, since the
exposure level drops off
dramatically with distance. For
example, you could use a
headset and carry the wireless
phone away from your body or
use a wireless phone connected
113