Advertisement
Quick Links
www.lightemotion.com.au
WDMX
Wireless DMX Transmitter & Receiver.
User's instruction manual
This manual contains important information about the safe installation and use of this product
Please read this instruction manual carefully before installing or operating
Please keep these instructions in a safe place for future reference
V1.00
Advertisement
Summary of Contents for Light Emotion WDMX
- Page 1 WDMX Wireless DMX Transmitter & Receiver. User’s instruction manual This manual contains important information about the safe installation and use of this product Please read this instruction manual carefully before installing or operating Please keep these instructions in a safe place for future reference...
- Page 2 Introduction Thank you for the purchase of your WDMX Wireless DMX transmitter and receiver by Light Emotion. We are confident you will be satisfied with your purchase and enjoy many years of use from this Professional Light Emotion product. Please read these instructions carefully to ensure the product is well look after and used correctly to avoid any potential problems.
-
Page 3: Operation
4. Operation The WDMX will automatically determine if it is acting as a transmitter or a receiver. If a DMX cable from a console is plugged into the device’s input, then it is a transmitter. The output can still be used to continue wired DMX communication at the same time as wireless. -
Page 4: Dmx-512 Control Connection
5. DMX-512 Control Connection The WDMX needs to connect to fixtures and DMX controllers using 3 pin XLR cable. You can connect the product to a DMX controller and then to other fixtures with 3 pin XLR inputs and outputs. The signal cable should have two core with shielded cable, the signal connectors are XLR input and output connectors. - Page 5 6. WDMX Set up. A pair of WMDX wireless DMX units effectively replace a DMX cable. In many set ups, the DMX controller is distant from the lighting rig or set up so a wireless solution avoids the need for long DMX cable runs from controllers to fixtures.
- Page 6 Traditionally, the solution via wired DMX would be to use a DMX splitter to send the DMX signal into 2 or more locations. But with WDMX, you eliminate the need for a DMX splitter by being able to have the transmitter at the DMX controller with receivers in any number of locations within the range of the transmitter.
-
Page 7: Warranty
We recommend you register your warranty online at www.industrygear.com.au. Purchased from:_________________________________________ Contact Details:_________________________________________ Date Purchased:_________________________________________ Invoice/Receipt Number:__________________________________ Copyright Light Emotion 2017. E&OE Exclusively imported by LSW Imports and Distribution PO Box 887, Kingsgrove, NSW, 2208 sales@lswonline.com.au www.lightemotion.com.au 1800 643 111 (within Australia)