INTRODUCTION…………………………………………………………………………………………………………………………………………4 DEFINITIONS USED IN THIS MANUAL………………………………………………………………………………………………………...5 OPERATORS MANUAL…………………….…………………………………………………………………………………………………………6 PRE-USE INSPECTION……………….……………………………………………………………………………………………………………….6 PROPER OPERATION SEQUENCE…..…………………………………………………………………………………………………………..6 POST OPERATION INSPECTION……….………………………………………………………………………………………………………...7 SAFETY INFORMATION……………………………………………………...……………………………………………………………………..7 LOAD KING DUMP BODY LABELS……………………………………………………………………………………………………………….9 LUBRICATION AND MAINTENANCE……………………………………………………..…………………………………………………..12 LOAD KING WARRANTY………………….……………………………………………………………………………………………………….13 LIMITATION OF LIABILITY………………………………………………………………………………………………………………………..13 LOAD KING WARRANTY DATA RECORD……………………………………………………………………………………………………14 REVISION CONTENT………………………………………………………………………………………………………………………………...15 OM-DMP-1000...
Definitions Used in this Manual The following table describes text and symbols used to highlight important information. Signal Word Symbol Explanation Danger is used to alert readers about an immediate and serious hazard that will likely be DANGER fatal. Warning is used to alert readers about the potential for serious injury or death or serious WARNING damage to equipment.
Pre-Use Inspection 1. Before using a Load King Dump Body, do a 360 degree walk around to visually inspect that the dump bed will be free of obstructions once in operation. 2. Be sure to check the oil sight gauge on the reservoir to ensure the tank is full and that no oil has leaked out.
SAFETY INFORMATION For the operator’s protection, there are warning labels and safety devices on the Load King Dump Body that are NOT to be tampered with or removed. It is important for the operator to read all warning labels before operating the Load King Dump Body. It is the owner’s responsibility to ensure that the operator and workers on and around the Dump Body understand all of the safety warnings herein and affixed to the machine.
Page 8
Do not drive truck above 5 mph with PTO engaged. This may result in serious dam- age to chassis and hydraulic systems. 11. Load King is not responsible for any loss or damage resulting from operators neglect of the safety information provided.
Page 10
LOAD KING DUMP BODY LABELS OM-DMP-1000 REV: B...
Page 11
LOAD KING DUMP BODY LABELS ITEM NO. PART NUMBER DESCRIPTION QTY. DMP00194-5 LARGE LOAD KING LOGO DECAL DMP00194-4 GREASE POINT DECAL DMP00194-3 CAUTION - PINCH POINT DECAL DMP00194-2 CAUTION DECAL DMP00194-1 DANGER DECAL DMP00195-7 CTOS LOGO DECAL DMP00194-6 SMALL LOAD KING LOGO DECAL...
LUBRICATION AND MAINTENANCE Lubricate grease zerks in main hinge pins and tailgate hinge pins (4 in total). See fig. 1. Fig. 1: Tailgate and Main Hinge Grease Zerks Lubricate grease zerks in body prop hinge housing (1 each side, 2 total). See fig. 2. Fig.
LOAD KING WARRANTY Load King (herein after referred to as the COMPANY) warrants all products manufactured by it and purchased by you to be free from defects in material and manufacture at the time of shipment, for one (1) year from date of delivery. The COMPANY will furnish replacements for such parts as the COMPANY finds to have been defective at the time of delivery or, at the COMPANY’s option, will make or authorize repairs to...
LOAD KING WARRANTY DATA RECORD Dump Body Warranty Form Submission Date Date of Delivery Model Number Dealer Address Customer Address Record this information at the time that warranty registration form is completed and returned to Load King OM-DMP-1000 REV: B...