TABLE OF CONTENTS PAGE # SAFETY INSTRUCTIONS……………………...…………………………………………………….………………………..…………………...2 INSTALLATION INSTRUCTIONS……………………….….…….………………...……..….………………………………..…...…..…...3 ISLAND INSTALLATION....................................3 OPERATING INSTRUCTIONS....................................4 TEMPERATURE CONTROLS...................................4 HEAT-ON LIGHT......................................4 MOISTURE VENT CONTROL...................................4 HEATING INSTRUCTIONS..................................4 CLEANING & MAINTENANCE…………………………………………………………………………………………..…………….....….5 TROUBLESHOOTING......................................6 PARTS LIST………………………………………………….………….……….……….…….………….……….……………………......7 EXPLODED ILLUSTRATION………………………………………………………………………….……….…….…………….…..…....8 1 YEAR LIMITED WARRANTY…………………………………….………….…….……….….……………..….………………….…......9 REGISTERING YOUR WARMING DRAWER............................9 - READ THE FOLLOWING INSTRUCTIONS CAREFULLY AND BE SURE YOUR WARMING DRAWER IS PROPERLY INSTALLED, ASSEMBLED AND CARED FOR.
SAFETY INSTRUCTIONS READ CAREFULLY BEFORE OPERATION OF YOUR WARMING DRAWER WARNING! - ELECTRICAL SHOCK HAZARD. - PLUG INTO A GROUNDED 3-PRONG OUTLET. - DO NOT REMOVE GROUND PLUG. - DO NOT USE AN ADAPTER. - DO NOT USE AN EXTENSION CORD. - FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN DEATH, FIRE OR ELECTRICAL SHOCK.
INSTALLATION INSTRUCTIONS READ CAREFULLY BEFORE INSTALLATION OF YOUR WARMING DRAWER IMPORTANT: Be sure that the warming drawer is properly grounded and installed by a qualified technician. The electrical cord has a 3 prong plug, do not cut any of the prongs. Make sure that the island is free of cracks that would allow water or other liquids to get into the electrical controls.
OPERATING INSTRUCTIONS TEMPERATURE CONTROLS The temperature control dial is used to select the temperature of the warming drawer. It is located on the right hand side of the control panel and has dial settings from 1 to 10. The “1” setting is the lowest temperature, which is around 60°F, while the “10” setting is the highest temperature which is around 220°F.
CLEANING & MAINTENANCE The warming drawer is made of welded #304 stainless steel. It is non-rusting and non-magnetic. 1. Allow the warming drawer and its accessories to cool before cleaning. 2. Remove the steam pans and all accessories from warming drawer. 3.
TROUBLESHOOTING SYMPTOM CORRECTIVE ACTION Warming drawer will not heat up. Check if the unit is plugged in to an electrical outlet. Heat-on light does not come “on”. Check if the temperature control dial is set properly. Check if the circuit breaker is open.
PARTS LIST MODEL #85747 WARMING DRAWER REF # PARTS # DESCRIPTION WARRANTY PERIOD 85701 KNOB 1 yr 85703 DRAWER CENTER BAR 1 yr 16522 DRAWER END CAP 1 yr *85705 DRAWER 1 yr 85706 VALVE ASSEMBLY 1 yr Any item with an * next to it requires a serial number HOW TO ORDER REPLACEMENT PARTS Please refer to the parts list on this page.
REGISTERING YOUR WARMING DRAWER In order to validate your Bull Limited Warranty, you must complete the Warranty Registration Card within 90 days from the Proof of Purchase. You may register your unit either online at www.bullbbq.com or by sending in the completed hard copy along with a copy of the Proof of Purchase to:...
Need help?
Do you have a question about the 85747 and is the answer not in the manual?
Questions and answers