Step 7: Easy Setup - Sony RDR-VX530 Operating Instructions Manual

Step 7: Easy Setup

Follow the steps below to make the minimum
number of basic adjustments for using the
recorder. If you do not complete Easy Setup, it
will appear each time you turn on your recorder.
Settings are made in the following order.
OSD Language Setup
m
Clock Setup
m
Cable Box/Sat. Control Setup
m
Tuner and Channel Setup
m
TV Type Setup
m
Audio Connection Setup
m
Finished!
Number
buttons
O RETURN
1
Turn on the TV.
2
Press "/1.
The recorder turns on.
3
Switch the input selector on your TV so that
the signal from the recorder appears on
your TV screen.
"Initial setting necessary to operate the DVD
recorder will be made. You can change them
later using setup." appears.
• If this message does not appear, select "Easy
4
Press ENTER.
The setup display for selecting the language
used in the on-screen display appears.
5
Select a language, and press ENTER.
The setup display for clock setting appears.
"/1
6
Select "Manual," and press ENTER.
M/m/</,,
Press M/m to set the month and press ,. Set
ENTER
the day, year, hour, minutes, and AM/PM in
the same way, then press ENTER. The day of
the week is set automatically.
• If you used antenna hookup C (page 15),
The setup display for cable box/satellite
receiver control appears.
Setup" in the "Setup" display to run Easy
Setup (page 108).
Easy Setup
No Disc
Select the screen language.
English
Français
Español
Easy Setup
No Disc
Select a method for setting the clock.
If you select "Auto", this recorder will look
for a time signal when you turn it off.
Auto
Manual
you can select "Auto." The recorder will
automatically search for a channel that
carries a time signal when you turn off the
recorder after finishing Easy Setup.
,continued 23