Charging The Battery; Inserting The Battery - Sony ROLLY SEP-30BT Operating Instructions Manual

Charging the Battery

The player operates on the supplied rechargeable lithium-ion battery (hereinafter called the
"battery"). When you use the player for the first time, or the battery has been discharged,
connect the player to a computer to charge it.

Inserting the battery

1
Turn the battery lid screw to OPEN, using a coin or the like, and open the battery
lid.
2
Insert the supplied battery all the way in securely, and close the battery lid.
3
Turn the battery lid screw to CLOSE, using a coin or the like.
1
Notes
Make sure that the battery lid is closed when you operate the player. If the battery lid is open, a

malfunction may occur.
When you insert the battery, be careful not to catch your fingers in the battery lid.

Charging the battery
1
Open the USB jack cover, and connect the supplied USB cable to the USB jack.
2
Connect the other end of the USB cable to the USB port of a computer.
The Play-button indicator lights up in orange, and charging starts. When charging is
completed, the Play-button indicator turns yellow. Charging will take about 5 hours*.
(When you charge the battery using the Rolly Charging Cradle CDL-SE10 (not
supplied), the Play-button indicator goes out when charging is completed. Charging will
take about 3 hours*.)
* Expected charging time to charge a fully discharged battery at 25 °C (77 °F). The charging
time will vary depending on the battery condition or the charging environment.
USB jack
continued

1