Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Purelogic PLCM-R1
- Page 1 User manual PLCM-R1 CNC machine Ethernet control panel...
- Page 2 (for example, NC program execution speed, etc.). 2. DELIVERY SET • PLCM-R1 CNC machine control panel – 1 piece • PLCM-R1 connection and setting manual – 1 piece • Software disc – 1 piece •...
- Page 3 4. MAIN CONTROLS USE HIGH-GRADE JAM-PROOF Ethernet CABLE (cat. 5 or higher). CONTROLLER IS COMPATIBLE WITH MACH3 R3.043.xxx VERSIONS OR LATER. Fig. 1. Layout of buttons and indicators • 1..7 buttons do not have specific designation, they can be programmed to any function. If control panel with MACH3 software is used, any code can be assigned to each button (list of user interface buttons, OEM Buttons).
- Page 4 Fig. 2. Power injector connection diagram 2. Install relevant plug-in for operation of control panel with MACH3 software. Download archived file of software from www.purelogic.ru/doc/SOFT/PLPendant.zip and run “setup.exe” file contained in archive. Software installation wizard will open. Fig. 3. Installation wizard * - Additional system components such as Microsoft .NET Framework 2.0 distribution kit and Microsoft...
- Page 5 Internet on this PC. Press “Install”. Wizard will copy necessary files and accomplish its operation. Fig. 4. Automatic setting of network 3. Start MACH3 and enter Config->Config Plugins menu. In opened window (fig.5) turn on PLPendant Purelogic RnD plug-in and restart MACH3. Fig. 5. Automatic setting of network...
- Page 6 4. Select Plugin control -> PLPendant control. Control panel setting window will open as shown on fig.6. Fig. 6. Control panel setting window 5. There is drop-down list of all detected control panels at the bottom on window. Control panels are distinguished by serial numbers specified in parentheses. Select the required device. * - If you can not select the device (list is empty), this means that Windows Firewall blocks access to control panel.
- Page 7 7. Drop-down lists at the left and right sides of control panel image are used for designation of required functions to buttons and LED indicators. Click required button of indicator of control panel by mouse pointer to open the list of available functions relevant to that control.
Need help?
Do you have a question about the PLCM-R1 and is the answer not in the manual?
Questions and answers