Create New Substrate window
2
3
4
Measure spectrum now message
5
6
Spectrum Received message
7
ENWW
Click the Browse button (
Type a filename (preferably a name that refers to the substrate name). Do not type a
file extension; the software attaches the relevant file extension.
Click Save. The measure spectrum now message appears.
Click OK.
Measure the color of the substrate with the spectrophotometer. The SPECTRUM
RECEIVED message appears in the window below the Glossy Substrate Filename
field.
Click Apply. The new substrate (matching the substrate filename) is now available for
selection in the Substrate list of the Configure Color Matching Parameters window.
). The Save As window appears.
Adding a new substrate 75