Page 3
Peel off the sticker. To activate, use the provided pin to press the button underneath for 1 second. The light will turn green when the device is activated. AG45 Installation Guide...
Page 4
Use the provided alcohol wipe to clean Place and hold the device where you the install surface. would like to mount it. AG45 Installation Guide...
Page 5
Mark center Mark the location for the screws using Remove the tracker, and drill small the holes in the product. pilot holes. AG45 Installation Guide...
Page 6
Replace product and screw down with the included anti-theft bit. AG45 Installation Guide...
Page 7
The batteries are replaceable. You can it is fine, however it’s recommended you replace the batteries using Li-SOCL2 do not use a metallic paint which might batteries which are easily purchasable interfere with antenna performance. online, we recommend SAFT brand LS14500 batteries. AG45 Installation Guide...
Page 8
To attach the device without using The ideal orientation for the device is screws (for example, if you are mounting vertical with the LED indicator on the bottom. the device on a curved surface) use the provided VHB adhesive tape. AG45 Installation Guide...