Advertisement
Quick Links
Advertisement
Summary of Contents for Polsen VCP-2
- Page 1 VCP-2 PASSIVE STEREO VOLUME CONTROL PRODUCT MANUAL...
- Page 2 • Keep this unit away from water and any flammable gases or liquids. • Clean the unit with only a soft, dry cloth. • Do not attempt to disassemble or repair the equipment. Doing so will void the warranty, and Polsen will not be responsible for any damage.
- Page 3 O V E R V I E W Front VCP-2 Passive Stereo Volume Control Volume control knob Mute button Back 1/4 in. TS/TRS outputs XLR/TRS combo inputs...
- Page 4 C O N N E C T I N G T H E V C P- 2 T O A C O M P U T E R To connect the VCP-2 to a device with a 1/8 in. (3.5 mm) TRS stereo output, follow these steps: 1.
- Page 5 To connect the VCP-2 to a device with XLR or 1/4 in. TRS outputs, such as an audio interface or sound, follow these steps: 1. Connect the outputs of your interface or sound card to the inputs of the VCP-2. The VCP-2 will accept XLR or 1/4 in. TRS plugs.
-
Page 6: Output Impedance
S P E C I F I C AT I O N S DESIGN Passive CHANNELS XLR/TRS combo ( × 2) INPUT CONNECTORS 1/4 in. TRS ( × 2) OUTPUT CONNECTORS OUTPUT IMPEDANCE Balanced: 10 kΩ Unbalanced: 5 kΩ INPUT IMPEDANCE 600 Ω... -
Page 7: Troubleshooting
• Make sure your speakers are correctly connected to the VCP-2. computer’s audio • Make sure the volume knob of the VCP-2 is turned up. output: • Make sure the mute button is not engaged. • Check your settings in the Sound and Audio Devices control panel (Windows) - Page 8 To obtain warranty coverage, contact the Polsen Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Polsen along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.
Need help?
Do you have a question about the VCP-2 and is the answer not in the manual?
Questions and answers