1. Manuals
  2. Brands
  3. Simplicity Manuals
  4. Snow Blower Accessories
  5. 1692924
  6. Operator's manual

Simplicity 1692924 Operator's Manual

Attachment, snow/dozer blade
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
How to use this file...(Installation Instruction Sheets)
————————————————————————————————————————————–––
Instructions for
Print Vendors (Paper Manuals)
P a p e r :
* Finish Size is 8-1/2 x 11
* Body—50 lbs brilliant white offset or equivalent.
P r e s s :
* Body—1-color, 2-sided
Bindery:
* If document is 1 or 2 pages, run as 8-1/2 x 11 sheets.
* If document is 3 or 4 pages, and can be run as 2 sided 11 x 17 -- then fold to 8-12 - 11.
* If document is MORE than 4 pages, run as 8-1/2 x 11 sheets with UL Corner Stitch.
C O V E R S :
* This document is a self-covered piece.
• Check the last page of the document for the individual document number
(a TP 200-XXXX-XX-XX-SMA number).
B O D Y :
* REMEMBER: ODD number pages are ALWAYS right hand pages, and EVEN number are ALWAYS
left hand pages.
G e n e r a l :
* This instruction page is NOT part of the document and must NOT be printed.
• Pages labeled with the text "THIS PAGE INTENTIONALLY BLANK" are placement pages ONLY,
and should NOT be printed.
————————————————————————————————————————————–––
If you have further questions on how to utilize this file, please contact
Simplicity Technical Publications Department at (414) 284-8650.

Advertisement

Table of Contents
loading

Summary of Contents for Simplicity 1692924

  • Page 1 • Pages labeled with the text “THIS PAGE INTENTIONALLY BLANK” are placement pages ONLY, and should NOT be printed. ————————————————————————————————————————————––– If you have further questions on how to utilize this file, please contact Simplicity Technical Publications Department at (414) 284-8650.
  • Page 2 THIS PAGE INTENTIONALLY BLANK...
  • Page 3 ATTACHMENT OPERATOR’S MANUAL Snow/Dozer Blade Mfg. No. Description 1692924 60” Snow/Dozer Blade (for use with Legacy / 2000 / 2900 Series) 1717570-01 Rev 2/1998 TP-100-2101-01-AT-SMA...
  • Page 4 M A N U F A C T U R I N G , I N C . 500 N Spring Street / PO Box 997 Port Washington, WI 53074-0997 www.simplicitymfg.com © Copyright 1998 Simplicity Manufacturing, Inc. All Rights Reserved. Printed in USA.

  • Page 5: Table Of Contents

    Recommended Accessories Tire chains and Simplicity Quick Tach weights are recommended when installing this attachment on your tractor. Quick Tach weights are an easy way to improve traction and stability making your dozer more efficient. Quick Tach weights are easy to install and remove, and can be added in 50 lb.

  • Page 6: Safety Rules & Information

    Safety Rules & Information Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment. The triangle in text signifies important cautions or warnings which must be followed.

  • Page 7: Features & Controls

    Features & Controls Please Take a moment and familiarize yourself with the name, location, and function of these controls so that you will better understand the safety and operating instructions provided in this manual. Figure 1. Dozer Blade Controls Blade Angle Release Lever Angling Control Lever C.

  • Page 8: Checks Before Starting

    General Operating Instructions Checks Before Starting WARNING 1. Refer to the Maintenance & Adjustments sections of Perform the Safety System Interlock test found in this manual and perform any needed service. Also, your tractor Operator’s Manual. If tractor does not refer to the tractor Operator’s Manual and perform pass the test, do not operate the tractor.

  • Page 9: Changing Angle Of The Blade

    General Operating Instructions Changing Angle of the Blade: Snow Plowing Tips See Figure 1 on page 3 for location of Controls. • Determine the best snow removal pattern before beginning. 1. Fully raise the attachment lift by depressing the REAR attachment lift pedal (C, Figure 1). •...

  • Page 10: Maintenance & Normal Care Schedule

    Maintenance WARNING Lubricate Dozer Blade To avoid serious injury, perform maintenance on Lubricate the dozer blade as shown in Figure 2. Where the tractor or dozer blade only when the engine is an oil can is shown, wipe the area clean, apply a few stopped, parking brake is set and all moving parts drops of oil (SAE 30), then wipe up drips or spills.

  • Page 11: Adjustments

    Adjustments ADJUSTMENTS Skid Shoe Nuts Skid Shoe Adjustment On smooth surfaces such as concrete or asphalt, the scraper bar should scrape the surface. On surfaces such as gravel, the scraper bar should be set high enough so that it will not pick up debris. 1.

  • Page 12: Initial Setup & Assembly

    Initial Setup & Assembly Tractors Equipped with 16- 1/2” Front TIres, Use These Holes Tractors Equipped with 18” Front TIres, Use These Holes Figure 6. Assemble Hitch Pivot Assembly Figure 5. Assemble Dozer Lift Arm Front Hitch Assy. D. Cotter Pin Dozer Hitch Back Hitch Assy.

  • Page 13: Install Front Hitch Mounting Brackets & Angling Rod Support Arm

    Initial Setup & Assembly Bracket Mounting Holes Located Here Figure 10. Front Hitch Mounting Brackets Figure 9. Front Hitch Bracket Mounting Holes Hitch Bracket Frame Install Front Hitch Mounting Brackets & C. Capscrews, 5/16-18 x 1-1/4” Angling Rod Support Arm D.

  • Page 14: Install Rear Hitch Mounting Brackets

    Initial Setup & Assembly Install Rear Hitch Mounting Brackets 1. Remove the front four capscrews and washers secur- ing the drawbar to the transmission (see Figure 13). 2. Attach the rear hitch brackets (A, Figure 14) to the drawbar and transmission with the 5/8-11 x 2” cap- screws (C) and washers (B) provided.

  • Page 15: Attach Hitch Onto Tractor

    Attaching & Removing the Hitch & Blade Attach Hitch Onto Tractor 1. Slide the hitch and lift rod assembly under the tractor. 2. Attach the rear end of the ladder hitch (B, Figure 16) the to the rear hitch brackets (A) using clevis pins (C) and safety clips.

  • Page 16: Attaching Dozer Blade

    Attaching & Removing Figure 19. Install Angling Arm Figure 18. Attach Dozer Hair Pin Clip Dozer Pins Support Arm Eye Bolt Clevis Pin C. Angling Rod C. Attachment Hooks Attaching Dozer Blade 1. Install the lift arm extension if not already done (see Install Lift Extension under INITIAL SETUP).

  • Page 17: Removing Dozer & Hitch

    Attaching & Removing Figure 23. Install Angling Arm Figure 22. Angling Cable Adjustment Angling Rod Hair Pin Clips Support Arm Locking Tab C. Clevis Pin & Hair Pin D. Angling Cable Removing Dozer & Hitch Front NOTE: Whenever removed, install clevis pins, hitch pins, clips and hardware into dozer and hitch for storage.

  • Page 18: Hardware Identification & Torque Specifications

    Hardware Identification & Torque Specifications Common Hardware Types Torque Specification Chart Hex Head Capscrew FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%) Washer Hardware Lockwasher Marks Grade Carriage Bolt SAE Grade 2 SAE Grade 5 SAE Grade 8 Hex Nut Size Of in/lbs in/lbs in/lbs...
  • Page 19 NOTES...
  • Page 20 NOTES...

Table of Contents