eufy Security Entry Sensor Quick Start Manual page 5

eufyCam LED indicator
eufyCam LED indicator color Camera status
SYNC
Flashing white 2
>
Flash red and white
Firmware upgrading
simultaneously
Solid white Camera is successfully connected to HomeBase
The camera or system is about to switch off /
Flashing red Anti-theft function activated / Camera battery
is low
Solid red Camera is charging
Sensor
1
3
2
05
Syncing with HomeBase / Camera
live streaming / Camera recording
SYNC button
1
LED indicator
2
Sensor Magnet
3
Entry Sensor LED indicator
Sensor LED indicator color Sensor status
Flashing white Connecting to HomeBase
Flashing white (Twice) Door / Window is opened
Flashing white (Once) Door / Window is closed
Door / Window is opened and sensor needs
Flashing red (Twice) attention: Low battery / Disconnected from
HomeBase
Door / Window is closed but sensor needs
Flashing red (Once) attention: Low battery / Disconnected from
HomeBase
Press the sync button on the
camera and hold it for 10
seconds to reset the camera.
SYNC
10
>
It's necessary to set up the HomeBase and cameras on
the app before you mount the cameras outdoors.
Press the sync button on the camera
5 times within 3 seconds to switch
off the camera.
SYNC
X5
06