Do you have a question about the LCM2X1UP and is the answer not in the manual?
Questions and answers
Summary of Contents for CHIEF LCM2X1UP
Page 1
I N S T A L L A T I O N I N S T R U C T I O N S LCM2X1U LCM2X1UP Ceiling-Mounted Menu Boards Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description LCM2X1U / LCM2X1UP...
Chief product to which an accessory and/or component is attached. ACCESSORY: AN ACCESSORY is the secondary Chief LCM2X1UP product which is attached to a primary Chief product, and may have a component attached or setting on it. LCM2X1U 125 lbs 125 lbs 125 lbs...
Installation Instructions LCM2X1U / LCM2X1UP LEGEND Tighten Fastener Pencil Mark Apretar elemento de fijación Marcar con lápiz Befestigungsteil festziehen Stiftmarkierung Apertar fixador Marcar com lápis Serrare il fissaggio Segno a matita Bevestiging vastdraaien Potloodmerkteken Serrez les fixations Marquage au crayon...
LCM2X1U / LCM2X1UP Installation Instructions TOOLS REQUIRED FOR INSTALLATION 3/32" (included) 1/8" (included) 5/32" (included) 1/2" or 13mm 3/16" (included) PARTS [Interface Bracket Hardware Kit] (2 bags total - quantities listed per bag) A (4) B (4) Q (1) D (4)
Page 9
Installation Instructions LCM2X1U / LCM2X1UP INSTALLATION IMPORTANT ! : Refer to Dimensions section to find specific LCM2X1U/LCM2X1UP dimensions BEFORE proceeding with installation. NOTE: The following procedure assumes that a UL Listed CPA or CMA ceiling plate (not included) and an extension...
Page 10
LCM2X1U / LCM2X1UP Installation Instructions Attaching Mount to CPA Extension Column Install two 5/16" x 1" self-tapping screws (U) through two 5/16" flat washers (V), bottom stop collar (AA), and into installed column. (See Figure 5) Install and tighten 5/16" x 3/4" set screw (W) into bottom...
Page 11
Installation Instructions LCM2X1U / LCM2X1UP Align the center of the interface bracket (EE) with center of Attaching Display to Ceiling Mount screen. (See Figure 8) NOTE: The diamond-shape hole in the bracket corresponds to WARNING: IMPROPER INSTALLATION CAN LEAD TO the center of the mount.
Page 12
LCM2X1U / LCM2X1UP Installation Instructions Fasten bracket against ceiling mount extrusion using one Tilt 10-24 x 5/8" button head cap screw (Y). (See Figure 11) The interface brackets allow -5° to 20° tilt, and can be locked at Repeat for other interface bracket.
Page 13
Installation Instructions LCM2X1U / LCM2X1UP OPTIONAL: Security OPTIONAL: Add padlock (not included) to each interface bracket to lock display to ceiling mount. (See Figure 14) Padlock (Optional) Figure 14 Install back cover (DD) into four holes on back of ceiling mount.
Page 16
Europe A Franklinstraat 14, 6003 DK Weert, Netherlands P +31 (0) 495 580 852 F +31 (0) 495 580 845 Chief, a products division of Asia Pacific A Office No. 918 on 9/F, Shatin Galleria Milestone AV Technologies 18-24 Shan Mei Street...
Need help?
Do you have a question about the LCM2X1UP and is the answer not in the manual?
Questions and answers