Related Manuals for Up-shine Lighting UP-DB15-1.2-45W
Summary of Contents for Up-shine Lighting UP-DB15-1.2-45W
- Page 1 Technical Application Guide for UP - SHINE LED Double-emitting Batten UP-DB15-1.2-45W...
-
Page 2: Application Notes
Introduction DB15 suspending led batten light is a double- emitting luminaire designed with 270° wide beam angle. Distribute 60% lumens downwards to satisfying the basic requirement for activities and 40% lumens upwards to creating a brilliant lighting atmosphere. The double-emitting batten is equipped with high brightness SMD LED in high color rendering and top quality LGP to provide extremely uniform lighting. -
Page 3: Product Information
Product Information 1200 Technical Specifications Power Lumen Beam Model Voltage Power Lifespan Dimmable Dimension Factor (±5%) angle UP-DB15-1.2-45W AC230V ≥0.9 2970 3000K 40000h ≥80 L1200*W150*H19mm UP-DB15-1.2-45W AC230V ≥0.9 3460 4000K 40000h ≥80 L1200*W150*H19mm UP-DB15-1.2-45W AC230V ≥0.9 3190 5000K 40000h ≥80 L1200*W150*H19mm UP-DB15-1.2-45W... -
Page 4: Photometric Diagram
Spectral Distribution 3000K 4000K Max=9514 [1.0=20000] Max=9877 [1.0=20000] 3.72 SDCM F3000K 2.13 SDCM F4000K x=0.4474 y=0.4088 x=0.3842 y=0.3851 Wavelength(nm) Wavelength(nm) 5000K 5700K 3.90 SDCM F5700K Max=6144 [1.0=20000] Max=6934 [1.0=20000] 3.00 SDCM F5000K x=0.3324 y=0.3515 x=0.3502 y=0.3677 Wavelength(nm) Wavelength(nm) Photometric Diagram 3000K 4000K Polar intensity diagram... - Page 5 Polar Diagram Comparison -150 -120 UNIT: cd C0/180, 270.8 deg C30/210, 269.2 deg C60/240, 264.9 deg C90/270, 199.4 deg AVERAGE BEAM ANGLE (50%): 251.1DEG Driver lifetime & LED light decay rate LED Light Decay Rate Driver Lifetime 110% 90000 0.0040 80000 105% 0.0035...
-
Page 6: Installation
Installation 1 STEP 1 STEP 2 Take out the fittings and accessories. Knock the plastic anchor into ceiling. STEP 3 STEP 4 Take the bracket out from driver box. Fix the bracket and base of the steel wire on the ceiling by screws. STEP 5 STEP 6 Power off. -
Page 7: Packaging Information
STEP 7 STEP 8 Fasten the steel wire base onto the latten with screws. Connect the steel wires to the base until it’s tightened. STEP 9 STEP 10 Connect the DC plug, adjust the length of hanging wire to proper height. Restore Connect the other end of steel wire to the base on the ceiling.