Things To Know Before Using Your Scale; Install Batteries; Get The App; Measuring - Greater Goods Weight Gurus 0385 Get Started

Things To Know Before Using Your Scale

Install Batteries

Make sure to install the four included AAA batteries before using the scale for
the first time.

Get the App

Search for the "Weight Gurus" app in your device's app store. Install and
register an account to get started tracking.

Measuring

Measuring your weight and calculating body composition is easy. Simply
step on your scale with bare feet, and evenly distribute your weight. Make
sure that your feet are making good contact with all four conductors. Body
composition can only be displayed if you have properly set up a user profile
on your scale (page 7).

Auto-On

Auto-On is the easiest way to use your scale. Simply step on the weighing
surface with both feet and evenly distribute your weight. Once you
complete user set up (page 7), Auto-Detection will match you to your profile
automatically. If no match is made to a user profile, then the scale will only
display your weight information. Body composition calculations require
specific variables such as your height, gender, and activity level, so a user
profile must be setup in order to display those measurements.

Auto-Detection

Once a profile has been set up, your scale will automatically match you to
your correct profile by weight. The scale determines who the user is by using
a range of 10 lbs. and in some cases a conflict may arise if two or more users
are within 10 lbs. of each other (see "Troubleshooting" for resolving an Auto-
Detection conflict).

Press-Awake

Another easy way to turn on your scale is to briefly step on then off the
weighing area of your scale. Press-Awake allows you to enter setup mode to
create or edit a new user (see User Setup, page 7). If needed, it also allows
you to select your user profile manually.

What Happens if My Scale Can't Auto-Detect?

Only the weight data is shown and the scale will turn off after a few seconds.
Please manually select your user number and measure once again
(Press-Awake, select user number, Tap SET, then weigh).
6