Rapid Ice Production; Ice Bucket Function - U-Cube Creative Polar Ice User Manual

Introduction of ice sculpture:
The inukshuk is a traditional sculptural form used by the
The inukshuk is a traditional sculptural form used by
Inuit, a tribe of people who inhabit the arctic circle of
the Inuit, a tribe of people who inhabit the arctic
Canada. They are sculptures of welcome and friendship,
circle of Canada.
and this is why they have also been chosen to be the
They are sculptures of welcome and friendship, and
official logo of the 2010 Winter Olympics held in Vancouver,
this is why they have also been chosen to be the
BC. An inukshuk sculpture would make an ideal centerpiece
official logo of the 2010 Winter Olympics held in
to welcome guests into your own home for any event.
Vancouver, BC.
An inukshuk sculpture would make an ideal
centerpiece to welcome guests into your own home
for any event.
12

Rapid Ice Production

Method of Assembly：Only the "White ice" Compartment
Use only the "White ice" Compartment. If you wish to
make regular ice cubes in a hurry, use just the "white ice"
If you wish to make ice cubes in a short amount
compartment to produce common ice cubes. Place directly
of time the "white ice" compartment will
in the freezer for ice cubes in the shortened time of 2-4
produce common ice cubes.
hours. Once frozen, run the ice block under room-
Place directly in freeze for ice cubes in the
temperature water to crack, then strike with the back of a
shortened time of 2-4 hours.
spoon to break up the ice pieces.

Ice Bucket Function

Method of Assembly: Suction handle + Top lid + Base bucket.
Method of Assembly ：Cupule handle ＋ Top lid + Base
● Ready ice cubes can be placed in the base and sealed
Ready ice cubes can be placed in the base,
with the top lid to use as an ice bucket.
and sealed with the top lid to use the ice bucket
function.
● At room temperature, ice can be kept without melting for
In room temperature, ice can be kept without
2-3 hours.
melting for 2-3 hours.
13