1 TOUCHBERRY PI 10.1” 1.1 Controller Specifications: Panel PC based on Raspberry PI board, encasing a 10.1” resistive Touch Screen for industrial environment using Linux or Windows 10 IoT OSs. Board Raspberry Pi 3B + Broadcom BCM2837B0 Quad-core A53 (ARMv8) 64-bit @ 1.4GHz Broadcom VideoCore IV, OpenGL ES 2.0, MPEG-2 and...
Page 4
This Panel PC is based on GNU/Linux OS installed on a SD card. It has many interfaces built in: Ethernet, USB, WiFi… Windows 10 IoT is also supported. Using the Ethernet port or WiFi network you can remotely control all parameters, data and inputs/outputs of your control system.
1.2 Touchberry Pi 3 B I/Os Pinout The Raspberry Pi 3 model B pinout:...
Page 6
Next it is showed a table connection between external DC-37 female connector Pinout and Raspberry Pi Pinout: Raspberry Raspberry Raspberry Raspberry Raspberry Pi GPIO Pi GPIO Pi GPIO Pi GPIO Pi GPIO...
2 Tinker Touch 2.1 Controller Specifications: Item Tinker Board Rockchip Quad-Core RK3288 processor, Panel PC based on HummingBoard, incorporating a 10.1” resistive Touch Screen for industrial environment using Linux or Android Operating System. 2GB Dual Channel DDR3 4x2.0 USB (1 is used for Touch) Storage Micro SD(TF) card slot Network...
3 General Specifications Touch Panel 10.1” Item Power DC power supply 12Vdc to 24Vdc supply voltage Power DC power 22 VAC max. consumption supply Power supply 12V (30W) // 24Vdc (30W) voltage External Power supply power supply output 2.5A (12Vdc) // 1,25A (24Vdc) capacity Shock resistance 80m/s2 in the X, Y and Z direction 2 times each.
6 Communication Connections The communication connections are located in the lower part of the panel, at the right part, as you can see in the image below: Ethernet and USB port connectors (One of the USB ports is connected in order to activate the attach function)
7 Screen configuration Light: Operation indication led. On/Off: Switch ON/OFF the device. Menu: choose and select the configuration mode. Down: move down on the configuration menu. Up: move up on the configuration menu. Exit: Select the screen operation mode (HDMI operation mode).
9.2 Standard VESA Our panels are based on the VESA assembly standard (VESA 75 standard): 9.3 Trim Plate The trim plate, is NOT a product included in the Touch10.1'', you can buy it through our website. It is an embellisher for the Panel screen, The measurements for the assembly are specified below:...
10 Operating System on Touch Panels 10.1 Debian Debian is Unix-like computer operating system that is composed entirely of free software. Raspbian, Bananian and Debian Jessy are shorts adaptations of Debian 8 for embedded systems. Debian has a long available row of packages. Also it is possible to develop your own applications, servers, web servers, etc.
First, you will need to download for example: http://mirror.netcologne.de/qtproject/archive/qt/5.4/5.4.1/single/qt-everywhere- opensource-src-5.4.1.tar.gz Now with your arm-linux-... compiler, you can compile this sources for Raspberry. You can create a project with a Desktop Qt system. (Same as doing it for PC). Finally, you'll have to configure your Qt IDE in order to use the qt-everywhere sources compiled insteed of the Desktop ones.
Android is an Operating System Open Source developed by Google, based on Linux kernel and designed primarily for touchscreen mobile device such smartphones and tablets. Android on Industrial Shields Touch Panel PC’s functionality is like an Android tablet. 11 Kiosk Mode on Panel Touch 10.1”...