Advertisement

Web:
TX-1XX Series Printer User Guide
1......................................................................................................................................2
1.1
Disclaimer ..................................................................................................2
2......................................................................................................................................3
2.1
Product Introduction ..................................................................................3
2.2
Overview....................................................................................................4
3......................................................................................................................................4
3.1
Introduction to Operation...........................................................................4
3.2
Installation of the Rechargeable Batteries .................................................6
3.3
Connecting Balance to Printer ...................................................................7
3.4
Installing Ink Ribbon Cartridge .................................................................7
3.5
Replacing Ink Ribbon Cartridge ................................................................8
3.6
Installing the Printer Paper.........................................................................8
4......................................................................................................................................9
4.1
Select Language .........................................................................................9
4.2
Setting Date and Time..............................................................................10
4.3
Settings..................................................................................................... 11
5....................................................................................................................................14
5.1
Installing the software on PC...................................................................14
5.2
Driver Installation (using Window XP as example) ................................14
5.3
TX-1XX Label & Sample name Editor ...................................................17
5.4
Editing Sample Name ..............................................................................17
5.5
Editing Label............................................................................................18
6....................................................................................................................................18
6.1
Print sample name....................................................................................18
6.2
Print Lot number ......................................................................................19
6.3
Lot Number Auto-Increment....................................................................19
7....................................................................................................................................20
7.1
Firmware Update .....................................................................................20
7.2
Data Interface...........................................................................................21
8....................................................................................................................................23
8.1
Questions and Answers ............................................................................23
8.2
Maintenance.............................................................................................23
8.3
Physical Dimensions................................................................................24
Beijing Star Instrument Technology Co., Ltd
www.star-itech.com
Email:
Page 1 of 24
support@star-itech.com
2013-5-1
V1.0.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TX-1 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Staritech TX-1 Series

  • Page 1: Table Of Contents

    Beijing Star Instrument Technology Co., Ltd Web: www.star-itech.com Email: support@star-itech.com TX-1XX Series Printer User Guide 2013-5-1 V1.0.0 1............................2 Disclaimer ....................2 2............................3 Product Introduction ..................3 Overview....................4 3............................4 Introduction to Operation................4 Installation of the Rechargeable Batteries ..........6 Connecting Balance to Printer ..............7 Installing Ink Ribbon Cartridge ..............7 Replacing Ink Ribbon Cartridge ..............8 Installing the Printer Paper.................8...
  • Page 2: 1.1 Disclaimer

    Beijing Star Instrument Technology Co., Ltd Web: www.star-itech.com Email: support@star-itech.com 1.1 Disclaimer All trademarks mentioned in this manual belong to the holder of them. We had collated this manual very carefully, but cannot guarantee that the contents of this manual is correct without any shortcomings, so we are not liable for losses which may be caused to users due to the manual.
  • Page 3: Product Introduction

    Beijing Star Instrument Technology Co., Ltd Web: www.star-itech.com Email: support@star-itech.com Product Introduction The TX-1XX series balance printer, with a streamlined appearance and an outstanding cost-efficiency, completely meets the quality requirements of the chemical and pharmaceutical industries and GLP, GMP standard certifications. From the most basic printing needs to the variety of applications, the TX-1XX series balance printer provides users with a flexible choice.
  • Page 4: Overview

    Beijing Star Instrument Technology Co., Ltd Web: www.star-itech.com Email: support@star-itech.com Features: • Fully compliant with the requirements of GLP/ GMP • Built in clock, print Weighing Data with Time & Date • User-defined identifier • 128x64 OLED display • Statistical Evaluation •...
  • Page 5 Beijing Star Instrument Technology Co., Ltd Web: www.star-itech.com Email: support@star-itech.com : Soft key 1, usually it is for inserting the sample name. In setting mode, it changes the cursor position to the left side. : Soft key 2, usually it is for inserting the Lot No. In setting mode, it changes the cursor position to the right side.
  • Page 6: Installation Of The Rechargeable Batteries

    Beijing Star Instrument Technology Co., Ltd Web: www.star-itech.com Email: support@star-itech.com While the statistics memory is not empty, press this key and hold for about 2 seconds to cancel the statistics and clear the memory without printing the report. While the statistic memory is empty, press this key and hold for about 2 seconds to temporarily switch the statistics ON or OFF.
  • Page 7: Connecting Balance To Printer

    Beijing Star Instrument Technology Co., Ltd Web: www.star-itech.com Email: support@star-itech.com Connecting Balance to Printer 1. Disconnect the power supply before connecting the printer to the balance with the data cable. The cable has a unique direction, please connect them correctly. Please refer to the figure below. 2.
  • Page 8: Replacing Ink Ribbon Cartridge

    Beijing Star Instrument Technology Co., Ltd Web: www.star-itech.com Email: support@star-itech.com Replacing Ink Ribbon Cartridge Replace ink ribbon cartridge when the print becomes unclear and faint. Open paper cover then take out the ink ribbon cartridge by pressing at the right end marked with “Push”...
  • Page 9: Select Language

    Beijing Star Instrument Technology Co., Ltd Web: www.star-itech.com Email: support@star-itech.com 3. Put the paper shaft correctly into the paper slot. The front end of the paper must be at the bottom and facing towards you. Please refer to the figure below: 4.
  • Page 10: Setting Date And Time

    Beijing Star Instrument Technology Co., Ltd Web: www.star-itech.com Email: support@star-itech.com press the key. 3. When the figure below appears on the display, press choose language,then press to confirm. Setting Date and Time For the first time installation of the printer or 14 days without power supply it is required to reset the time and date.
  • Page 11: Settings

    Beijing Star Instrument Technology Co., Ltd Web: www.star-itech.com Email: support@star-itech.com Settings Press and hold the key for at least 2 seconds, the setting menu will appear on the display (as the figure below). Notes: Some functions or settings may not be supported depending on the model of the printer.
  • Page 12 Beijing Star Instrument Technology Co., Ltd Web: www.star-itech.com Email: support@star-itech.com statistics report will be printed out Printout language English English/Chinese Item Factory setting Setting options memo Automatic tarring ON/OFF After printing weighing date each time ,the balance will execute TARE operation Key press beep ON/OFF...
  • Page 13 Beijing Star Instrument Technology Co., Ltd Web: www.star-itech.com Email: support@star-itech.com successful, indicate light would turn off automatically. Baud Depends on the 110,300,600,1200, Must match with the model of printer 2400,4800, balance, modify 14400,9600,19200, carefully. 38400,57600, 115200 Data bits Depends on the 7bits/8bits Must match with the model of printer...
  • Page 14: Installing The Software On Pc

    Beijing Star Instrument Technology Co., Ltd Web: www.star-itech.com Email: support@star-itech.com Installing the software on PC The software is mainly for: 1. Setting the label text which will be printed out when printer starts. 2. Setting the label text which will be printed out. 3.
  • Page 15 Beijing Star Instrument Technology Co., Ltd Web: www.star-itech.com Email: support@star-itech.com below: 4. Installation of TX-1XX printer drive will begin. The figure as shown below will be displayed on the computer screen: 5. During the installation, a XP compatibility warning will be displayed, click “Continue Anyway”.
  • Page 16 Beijing Star Instrument Technology Co., Ltd Web: www.star-itech.com Email: support@star-itech.com 6. When “Completing the Found new hardware wizard” appears, click “Finish” to complete the installation. Please refer to the figure below: Page 16 of 24...
  • Page 17: Tx-1Xx Label & Sample Name Editor

    Beijing Star Instrument Technology Co., Ltd Web: www.star-itech.com Email: support@star-itech.com TX-1XX Label & Sample name Editor 1. Connect the printer’s USB port to computer with USB cable. (Warning: do not connect the power adaptor to the printer) Double click the following “exe” file. Note: when the connection is wrong or disconnected, the dialog box will show “Equipment Unconnected”, please re-check the connection and make sure the driver has been installed successfully.
  • Page 18: Editing Label

    Beijing Star Instrument Technology Co., Ltd Web: www.star-itech.com Email: support@star-itech.com 2. Click “Write to printer” button when you had input all of sample and code you need. All of the sample names & codes in list will be saved in printer. In the course of usage, press the key and input the code, the sample name will be printed out accordingly.
  • Page 19: Print Lot Number

    Beijing Star Instrument Technology Co., Ltd Web: www.star-itech.com Email: support@star-itech.com key or the key to change the character, press the key to cancel, press the key to switch between uppercase and lowercase letters, press key to confirm modification and print the sample name. Tips: If the “print sample”...
  • Page 20: Firmware Update

    Beijing Star Instrument Technology Co., Ltd Web: www.star-itech.com Email: support@star-itech.com main menu are enabled, the Lot number will be increased automatically. Note: 1. The last character of the Lot number must be one of numbers from (0-9). 2. The Lot number will restore to previous setting after the printer reboots. Firmware Update Firmware is updated only when it is necessary or new features are obtained.
  • Page 21: Data Interface

    Beijing Star Instrument Technology Co., Ltd Web: www.star-itech.com Email: support@star-itech.com Data Interface Features: • EIA RS-232C / TTL(jumper setting internal, default:RS-232C) • D-Sub 9pin, male • Asynchronous, bi-directional, half duplex • Baud rate: 110, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 •...
  • Page 22 Beijing Star Instrument Technology Co., Ltd Web: www.star-itech.com Email: support@star-itech.com to logic low , and vice versa; When the CTS is logic high , it prevents further transmission of data, the data will be stored in the transmit buffer until CTS is logic low.
  • Page 23: Questions And Answers

    Beijing Star Instrument Technology Co., Ltd Web: www.star-itech.com Email: support@star-itech.com Handshake = DTR/DSR Questions and Answers Q: Why the printer cannot print? A: Maybe the communication settings on the printer and balance do not match. Please re-check and try again, for the details you can refer the manual of balance and printer.
  • Page 24: Physical Dimensions

    Beijing Star Instrument Technology Co., Ltd Web: www.star-itech.com Email: support@star-itech.com printer. 2. Keep the irritant liquid far away from printer. 3. Disconnect the power cable and the data cable before cleaning. Please use soft dry cloth to wipe the printer after cleaning. The power consumption is quite low so it can standby for a long time.

This manual is also suitable for:

Tx-100Tx-110

Table of Contents