Advertisement
Quick Links
bt-analyze
1. Read operation manual prior to using the equipment.
2. Do not use the unit if any contraindications are present.
B
4. Place the bt-analyze on the
surface of the skin. A beep
will signify the reading is
complete. During the
reading, do NOT press
the power or memory
buttons.
5. Press the memory button to save
the reading at the top of the
display screen. Readings will
save in the order you perform
them.
Skin Care for life inside and out
quick start guide
®
3. Turn on the bt-analyze by
A
holding the power button
(A) for 2-3 seconds.
Proceed by pressing
the memory button (B).
The unit will calibrate itself.
®
Advertisement
Summary of Contents for Bio-Therapeutic bt-analyze
- Page 1 ® 1. Read operation manual prior to using the equipment. 2. Do not use the unit if any contraindications are present. 3. Turn on the bt-analyze by holding the power button (A) for 2-3 seconds. Proceed by pressing the memory button (B).
- Page 2 Always remember to replace the cover when not in use. The bt-analyze sensor will make a slight click when depressed during moisture readings; this is normal. A reading of “UUU” means an error has occurred.
Need help?
Do you have a question about the bt-analyze and is the answer not in the manual?
Questions and answers