Creating Your Own Program (Program Play) - Sony MINIDISC MDS-JB920 Operating Instructions Manual

Playing MDs
Creating Your Own Program
(Program Play)
You can specify the playback order of the tracks on an
MD and create your own programs containing up to
25 tracks.
DISPLAY/CHAR
PLAY MODE
DISPLAY
>25
·
0 / )
1
While the deck is stopped, press MENU/NO
twice to display "Setup Menu".
2
Turn AMS to display "Program ?", then press
AMS (or YES).
3
a)
Do either
a) When using the controls on the deck
1 Turn AMS until the track number you want
appears in the display.
2 Press AMS.
If you enter the wrong track number
Press 0 or ) until the wrong track number
flashes, turn AMS to set the correct track
number, then press AMS.
If "0" flashes, press 0.
28 EN
MENU/NO YES
0
§ ·
≠ AMS ± ·
MENU/NO
EJECT
6
YES
MENU/NO YES
DISPLAY SCROLL TIME D.O BIT
PROGRAM
PLAY MODE DATE
CONTINUE SHUFFLE PROGRAM RECORDED PRESENT
A B C D E
1 2 3 4 5
F G H I J
6 7 8 9 10
K L M N O
Number
11 12 13 14 15
P Q R S T
buttons
16 17 18 19 20
U V W X Y
21 22 23 24 25
Z – . ,
REPEAT A˜B A.SPACE M.SCAN
>
/ 25 ? ! ( )
WRITE CLEAR P.HOLD
NAME CHAR NUM
CLEAR
·
P p
REC-IT
= + r
T.REC MUSIC SYNC
0 )
CD-SYNC
STOP START STANDBY
b)
or :
b) When using the remote
Press the number buttons to enter the tracks
you want to program in the order you want.
To program a track with a number over 25, use
the >25 button (see page 25).
If you enter the wrong track number
Press 0 or ) until the wrong track number
flashes, then enter the correct track number
0/)
with the number buttons.
If "0" flashes, press 0.
4
Repeat Step 3 to enter other tracks.
) r
The entered track is added to the location where
P p
the "0" flashes.
Each time you enter a track, the total program time
is added up and appears in the display.
5
After finishing programming, press YES.
"Complete!!" appears and programming is
completed.
6
Press PLAY MODE repeatedly (or PROGRAM
once) until "PROGRAM" appears in the display.
7 Press · to start Program Play.
To cancel Program Play
Press PLAY MODE repeatedly (or CONTINUE once)
when the deck is stopped until "PROGRAM"
disappears.
z
The program remains even after Program Play ends
When you press ·, you can play the same program
again.
Notes
• The display shows "- -m - -s" instead of the total playing
time when the total playing time of the program exceeds
199 minutes.
• "ProgramFull" appears when you program over 25 tracks.
Erase the unnecessary tracks to enter other tracks.