Do you have a question about the BSCCQ1 and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Dixon BSCCQ1
Page 1
Instructions and Operations Manual Inline, Side Entry, Side Outlet & Dual Strainers Read and understand this manual prior to installing, operating or servicing this equipment. Dixon Sanitary N25 W23040 Paul Road • Pewaukee, WI 53072 February 2019 ph: 800.789.1718 • fx: 800.789.4046...
Do’s and Don’ts • Do read and understand these instructions before installing or using the strainer. • Do use Dixon spare parts when replacing any components of the strainer. • Do Not attempt to service the strainer while under pressure. •...
Care of Stainless Steel The stainless steel components in Dixon Sanitary equipment are machined, welded and assembled by skilled craftsmen using manufacturing methods that preserve the corrosion-resistant quality of the stainless steel. Retention of corrosion-resistant qualities under processing conditions requires regular attention to the precautions listed below.
Technical Specifications Specifications: Maximum Differential Model Maximum Pressure (PSI) Maximum Temperature Pressure (PSI) BSCCQ1 BSCCQ2 Single Strainer - 50 PSI BSCCQ3 290 PSI at 70°F Overscreen - 25 PSI 250°F BSCCQ4 175 PSI at 210°F Filter - 10 PSI BSCCS1...
Be sure adequate line supports exist to prevent stress on fittings and strainer body. Install supports approximately every ten feet on either side of the strainer assembly. All Dixon strainer assemblies operate in any position. However, to maintain 3A certification, the unit must be installed in the vertical position.
6. Check all wetted components for any sign of damage that could have resulted from large particulate or water hammer. 7. For dual strainer units, inspect valves for any signs of damage and replace wetted components as necessary. Refer to Dixon ball and butterfly manuals for instructions.
Changing Filter Media 1. When installing a filter sock or over screen, save the original packaging. This will aid in identifying your filter media type when reordering. 2. Relieve all pressure inside the system and make certain the filtration system is drained of all liquid. 3.
Inline Disassembly 1. Remove the clamp (10) and lift off the outlet assembly (1). Note: Apply pressure to the outlet assembly when you remove the clamp, as the spring (2) will force the outlet assembly away from the body (6) when the clamp is removed. 2.
Side Entry Disassembly 1. Remove the clamp (10) and lift off the end cap with handle (1). 2. Remove the gasket (3) and inspect it for damage or wear. 3. Remove the spring (2) and the distributor cap (5). 4. Remove the back-up tube (4) the filter bag (8) or the mesh over screen (7). 5.
BS-2425-R250300 316L Distributor Cap BS-35-R100-200 BS-35-R250-300 Strainer Body BS-36-R150 BS-36-R200 BS-36-R300 Mesh Over Screen Contact Dixon Sanitary For Options Filter Bag Contact Dixon Sanitary For Options Retaining Ring BS-09-U100-200 BS-09-U250-300 Buna Squeeze Clamp 13MHHM-Q400 13MHHV-Q400 Strainer I & O Manual...
Side Outlet Disassembly 1. Remove the clamp (10) and lift off the end cap with handle (1). 2. Remove the gasket (3) and inspect it for damage or wear. 3. Remove the stand-off tube (11) and the PTFE retainer ring (12). 4.
DIXON VALVE AND COUPLING COMPANY (herein called "Dixon") warrants the products described herein, and manufactured by Dixon to be free from defects in material and workmanship for a period of one (1) year from date of shipment by Dixon under normal use and service.
Page 18
Dixon ’s strategic objective is to create solutions that make ™ products safer, leak-free, longer lasting, and always available. dixonvalve.com • Customer Service: 800.789.1718 Dixon Sanitary N25 W23040 Paul Road • Pewaukee, WI 53072 Customer Service: 800.789.1718 Fax: 800.789.4046...
Need help?
Do you have a question about the BSCCQ1 and is the answer not in the manual?
Questions and answers