Advertisement
Quick Links
Assembly and Operation Instruction
Electric baby stroller
ITEM NO：ADL1588
Age range：37~96months
Load limit：25kg
The assembling and recharging process should be performed by adults.
For the first use,suggested charging time is 4-6hours
Please read this directions carefully before assembling and using. After reading,
please keep it carefully for possible future use.
Advertisement
Summary of Contents for Zhejiang Dongma Baby Carrier ADL1588
- Page 1 Assembly and Operation Instruction Electric baby stroller ITEM NO：ADL1588 Age range：37~96months Load limit：25kg The assembling and recharging process should be performed by adults. For the first use,suggested charging time is 4-6hours Please read this directions carefully before assembling and using. After reading,...
- Page 2 Content： 1. Profiles and specification 2. Breakdown drawing 3. Assembling step 4.Instructions 5.Charging 6.Repairs 7.Maintenance Profiles and specification Age： 37~96 months Battery： 2*6V4AH Max weight： Size of car： 1050*550*490cm ≤25kg Speed： 3~5km/h Power Charger way way： Doubledrive:Output: Average Approximately280times Charger：220V DC12V0.5A battery life ：...
- Page 3 Exploded view Name Name Name Name Car body Rearview mirror Front wheel rear prop Windscreen seat Wear ring Dashboardl Rear wheel Shim Steering wheel Gearbox steering yoke...
- Page 4 Assembling steps The assembling process before using has to be operated by adults.The whole process takes approximately 30 minutes. Minute parts has potential danger of choking.Children should be forbidden touching and playing！ Tools needed in assembling:screwdriver (self-provided),vice(self-provided) Before assembling,please check the number of all the parts .The plastic package should be kept away from children since there’s danger of choking Installing rear axle and rear wheel:...
- Page 5 ssembling steps Installing front wheel: Put 12gasket*1 on one side of the front wheel Load wheel*1 Slightly forced by the boss wheels, and the wheels under pressure, the wheel assembly in place. (remark: pull the wheel to the outer pull to confirm the wheel assembly in place) ...
- Page 6 Assembling steps Installing steering wheel: Use the screw driver to unload the M5x35 inorganic screws. Connect the lead plug-in on the steering wheel to that of the open holes,and plug the steering wheel in to the end of the steering tube(pay attention that the plug-in is along the hole).Make sure the hole on the steering wheel is lined with the steering tube,then screw in the M5x35 inorganic screw.
- Page 7 How to use it(please make sure the switch is on Warning! When change gear,please make sure the car is completely stopped.Or will damage the gear case and motor ： Manual Forward： 1. Press the “Forward/backward”switch to forward； 2. Slightly step on “foot switch”,the car will moving forward Stop：...
- Page 8 Note: remote control should be used by the guardian, the child can not touch. How to use it(please make sure the switch is on 2.4GWireless stroller controller instructions For the first time using the code, the following steps: Step one：Installed on two AAA1.5V batteries, the remote control battery cover down to push the battery cover to open the battery (note the positive and negative polarity of the battery chamber), and finally close the battery cover, the indicator flashes three instructions battery is installed correctly;...
- Page 9 How to use it(please make sure the switch is on Battery warning： 1. The distance of the remote control car when baby and child adult ride shall not exceed the range of 15M. 2. The remote control only allows the guardian to use, and can not let the children touch.
- Page 10 Music： Push the button on the steering wheel,there will be trumpet or music Usage Using the method of auxiliary wheel, handle and matters needing attention： 1.When the car is insufficient, turn off the power. 2.The front bumper on the pulling out, after the bumper on the auxiliary wheel spins.
- Page 11 Charging： Power switch must be turned in off when charging Charging seat is located in the rear right. Plug the charger into a local mains power wall outlet Plug in the charging seat on the electricity power Matters need attention when charging ...
- Page 12 month to guarantee the life of the battery. The charger and the battery are not toy.Children should not be allowed to play with them. Warning： The assembling and charging process could only be operated by adults. Before use,please check whether all the part are installed well to position and connected tightly ...
- Page 13 ： Simple Maintenance Fault type Reason analysis Exclusion methods Car’s not moving 1.Battery has low voltage 1.Recharging the battery 2.Fuse protection 2.Stop for several minutes before 3.The nut of the wheel is dropped using again 3.Screw the nut on 4.Socked connector of the battery 4.Link it up again has fallen off 5.Change a new battery...
- Page 14 Battery indicating light is not 1.Body power is not on 1.Turn it on working 2.Battery is dead 2.Recharging the battery Car cannot be stopped 1.Electrical damage 1.Repair it in maintenance point ： Maintenance After the regular service of the product, adults should regularly (suggest once two weeks) check the main items, including storage battery, charging device, wires, outer skin, circuit changer and switching valve.
- Page 15 PlayActive outdoor toys for kids Thank you for choosing a PlayActive product. We hope your child will endure many years of fun with this item. If you require any trouble shooting assistance or help on assembly please view our tutorial videos available on our website. www.playactive.net WARNING! Do not use this vehicle indoors.