Advertisement
NOTE: For accurate dividing of smaller bulk samples, the
optional SPA-21 Quick Funnel inserts into the SP-55 Hopper.
For further reductions in sample size, use samples from two op-
posite corners, combine in hopper and repeat splitting process
until the desired fraction is reached: 1/8, 1/16, 1/32, etc.
For easier clean-up of hot-mix asphalt samples, apply a coat of
release agent on all surfaces that are likely to come in contact
with the asphalt. Please make sure release agents are approved
for use with asphalt and will not change the characteristics of
the mix being tested.
ACCESSORIES
GILSON QUARTERMASTER ASPHALT SAMPLE DIVIDER
Description
Gilson Quartermaster Asphalt Sample Divider
Accessories
Quick-Funnel Insert
Bucket-Liner Sample Bags, qty. of 10
8in Double-Loop Wire Ties, qty of 50
Wire Tie Twister w/Plastic Grip
Galvanized Steel Sample Containers
Material Handling Chute
HMA-68
MA-950
WARNING!
1. Asphalt paving materials are hot! Please use EX-
TREME CAUTION! ALWAYS wear protective cloth-
ing and safety equipment to prevent burns and se-
rious injury.
2. ALWAYS practice proper lifting techniques when han-
dling large samples.
3. Use CAUTION when opening the hopper door to pre-
vent injuries from pinching action of the hopper door
and the release handle mechanism.
4. Proper attention to safety is the responsibility of the op-
erator.
Model
SP-55
SPA-21
SPA-22
SPA-23
SPA-24
MA-950
HMA-68
SPA-22
SPA-21
Advertisement
