JRC NJT8304 Series Instruction Manual page 9

3. Waveguide
4. Connecter
5. Warranty
NJT8306 series Instruction Manual
DO NOT remove the sealing tape on the waveguide. If the
sealing tape is removed, it may lose the performance of
waterproof.
Connect the IF cable to the input connector of both N and F-
type with 0.68 to 1.13 N·m torque.
Opening or removing any component (e.g. label, and screws)
or sealed area will immediately void the warranty.
IM-T8304 Rev.01
Page 9