Introduction Dear paragliding fans, Thank you for choosing our harness NEON. We are convinced that this harness will provide you extraordinary comfort, easy adjusting and many nice moments during your flying. Manual contents all information how to adjust the harness correctly, usage manual and maintenance manual.
1. Safety notice This harness is designated only for paragliding purposes. Our harnesses had passed the most demanding safety tests in accordance with the CE certifications requirements EN1651 and Swiss tests LTF. Successful passing of these certifications confirms the highest quality of our products.
2. Attaching a rescue system Harness is compatible with all available rescue systems designated for paragliding. Connecting rescue system with harness In this manual we give you two examples of connecting harness and rescue system: Example 1: First please connect short loop (delivered with rescue system) with long V straps (delivered with the harness/fixed on the harness).
Page 5
Example 2 (recommended): Connection can be made also by mailon carabiner. Please drag the mailon thread by the spanner in order not to unscrew the nut and breaking the strength point. Please look at the pictures below that will help you in attachment. Connecting rescue system with harness by mailon carabiner Step 1...
Page 6
Please drag the line through loop on the left side of the container. Then drag the line through eyelets on the flaps and save with rescue thorn. Please do the same on right side. Below you can find pictures that will help you in installing the rescue system: Step.
Step 7 Step 8 Step 9 3. Fixing a paraglider to the harness Paraglider is attached to the main carabiners that are integral part of the harness. Example of fixing the paraglider into carabiner is shown below on the picture:...
4. Attaching a winch (towing release) In case there are no special loops for a winch, please attach the winch release (towing release) into the carabiner. Please look at the photo below: From safety reasons we recommend two-parts release. Towing release is not a part of the harness. 5.
Such adjusted harness is prepared for using. How to adjust speed system Harness NEON is standard delivered with speed system. His adjustment can be made as follows: 1. Hang the harness 2. Fasten paraglider risers into main carabiners 3.
Back protector and seat protector Harness Neon is equipped with two independent foam protectors. Seat protector is made from separate EPE foam that successfully absorbs shocks into seating part of the harness. This protector is already installed by the producer.
8. Check controls frequency recommended by producer Your harness needs constant checking (controls) that is aimed mainly on solid sewing, straps and firm parts of the harness. In case the harness is not under control regularly by the producer or authorized person, the producer is not responsible for technical condition of the harness and any damages or losses (material, financial, healthy and others) resulting from the above.
Stamp and signature of the producer or authorized person Control after 8 years of date of purchase Stamp and signature of the producer or authorized person Control after 10 years of date of purchase 9. Maximum pilot´s weight Maximum pilot weight for the harnesses sizes are as follows: 120 kg 120 kg 120 kg...
In case you are not flying for a longer time, we recommend opening the backpack and ventilating the equipment. In case the harness was wet, let it completely dry! Guarantee The producer supplies guarantee of twenty four months for the harness –...
Need help?
Do you have a question about the NEON and is the answer not in the manual?
Questions and answers