Advertisement
Quick Links
Advertisement
Summary of Contents for Up-shine Lighting UP-DB18-1600-40W
- Page 1 Technical Application Guide for UP - SHINE LED Batten Light UP-DB18-1600-40W...
- Page 2 Introduction DB18 is a high quality LED batten with high luminous efficacy 115lm/w. With a reliable and robust housing structure (IK10 & IP66), this maximizes the endurance and contributes to its long lifetime. With its flexible installation accessories, it can be used in a wide variety of applications.
-
Page 3: Product Information
Product Information 1600 Technical Specifications Power Lumen Beam Model Voltage Power Lifespan Dimmable Dimension Factor (±5%) angle UP-DB18-1600-40W AC100-277V ≥0.9 4080 3000K 50000h ≥80 1600*78*53.5mm UP-DB18-1600-40W AC100-277V ≥0.9 4520 4000K 50000h ≥80 1600*78*53.5mm UP-DB18-1600-40W AC100-277V ≥0.9 4680 5000K 50000h ≥80 1600*78*53.5mm... -
Page 4: Photometric Diagram
Spectral Distribution 3000K 4000K Max=7798 [1.0=20000] Max=7530 [1.0=20000] 3.20 SDCM F3000K 0.37 SDCM F4000K x=0.4427 y=0.3996 x=0.3801 y=0.3808 Wavelength(nm) Wavelength(nm) 5000K 5700K 5.69 SDCM F5700K Max=9472 [1.0=20000] Max=5808 [1.0=20000] 1.25 SDCM F5000K x=0.3234 y=0.3444 x=0.3483 y=0.3619 Wavelength(nm) Wavelength(nm) Photometric Diagram 3000K 4000K Polar intensity diagram... - Page 5 Polar Diagram Comparison -150 -120 UNIT: cd C0/180, 156.9 deg C30/210, 139.3 deg 1200 C60/240, 116.9 deg 1500 C90/270, 109.9 deg AVERAGE BEAM ANGLE (50%): 130.7DEG Driver lifetime & LED light decay rate LED Light Decay Rate Driver Lifetime 110% 90000 0.0040 80000...
-
Page 6: Installation
Linkable luminaries Qty ART-NR 200-277V 100-130V UP-DB18-1600-40W Installation 1 Step1 Step2 Knock 2pcs plastic anchors into ceiling. Fastening the clips on the ceiling. Step3 Step4 BROWN Open the end cap, put the wires through the BLUE hole, connect the terminal block (Brown to L, Blue to N), tighten the end cap to prevent the water into the lamp. -
Page 7: Packaging Information
Step3 Step4 BROWN Open the end cap, put the wires through the BLUE hole, connect the terminal block (Brown to L, Blue to N), tighten the end cap to prevent the Hanging the lamp to the suspending wires. water into the lamp. Adjust the length of suspending wires on same level, turn on the light.