G&P Medical Mobile-Alert HD Quick Start User Manual

Mobile-Alert HD
Button - Hold for 2-3 seconds to call your chosen emergency contact.
Button - Hold for 2-3 seconds to send a text and call up to 3 emergency
contacts. You'll feel it vibrate when you've held the button long enough.
On/Off Button
Hold down for 2
seconds
GPS Light
On (no blinking)
Flash every 1 second
Off
Flash every 5 seconds
Blink 3 times per second
Recharge the unit every 1 or 2 days by
connecting the cable in the exposed slot as you
see in this photo.
If you're not sure if the unit is on or not, press the
phone icon button briefly to see both lights come
on
CALLS & TEXTS
When the SOS button is pressed your contacts should each receive a text message showing SOS with a link to
your location. This should be followed by a call to one of the contacts. Sometimes if the phone service is
experiencing high traffic this sequence may change and the call will come through first.
If you've chosen the Fall Detector option, a beep will sound for approximately 45 secs before sending a text
message (stating that you've fallen) to your contacts. Your location will also be sent in the same text message.
If you activate the fall down by accident, you can stop the message being sent by immediately pressing either of
the buttons on the front.
Calls can be received on your Mobile Alert from any of your contacts. To answer an incoming call just press the
phone icon button. Hang up by pressing the phone icon button as well.
LOCATING THE DEVICE
Text: 0000,A00
Alternately, if you've chosen the option to get the location by calling, call the phone number of
the unit, let it ring for 1-2 rings, then hang up. A return text of the unit's location will be sent to you.
☞
⬅
Blue
Charging
Searching for GPS
Connected to GPS
Conserve Battery Mode
Low Battery Warning
- Quick Start User Guide
Volume Up
GSM Light
On
Flashing (Every 1 second)
Off
Flash (Every 5 sec)
⬅
Volume Up
⬅
Volume Down
Green
A call is coming or busy
Searching for cell signal
Connected to cell network
Conserve Battery Mode