Viking Range Incogneeto Use And Care & Installation Manual

Induction warmer

Advertisement

Quick Links

Use and Care /
Installation Guide
Incogneeto
Induction Warmer

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Incogneeto and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Viking Range Incogneeto

  • Page 1 Use and Care / Installation Guide Incogneeto Induction Warmer...
  • Page 2: Table Of Contents

    Every installation site has different electrical wiring. Because many different local codes exist, it is the Owner and Installer’s responsibility to comply with those codes. Viking Range, LLC is not responsible for any consequential damages as a result of failure to comply with installation requirements.
  • Page 3: Warnings & Safety Instructions

    Warnings & Safety Instructions • Before beginning, please read these instructions completely and carefully. • DO NOT remove permanently affixed labels, warnings, or plates from the product. This may void the warranty. • Please observe all local and national codes and ordinances. •...
  • Page 4 ● This product may only be serviced by an authorized service agent or by Viking Range, LLC personnel. Do not attempt to open the unit or perform service of any kind. For service information, contact Preferred Customer Service at +1 (888) 845-4641.
  • Page 5: Installation

    Installation Dimensions Dimensions 17-1/2” 4.5 cm 4-1/2” 1.8 cm 2-7/8” 7.4 cm 2-1/4” 5.7 cm 3-1/4” 8.3 cm 1-3/16” 3.0 cm 2-1/2” 6.3 cm 3-13/16” 9.7 cm 1” 2.5 cm...
  • Page 6: Electrical Requirements

    Installation Electrical Requirements The induction warmer must be properly grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing a safe path for the electric current. The induction warmer has a power cord with a 3-prong grounding plug, which must be used in a compatible and properly grounded outlet.
  • Page 7: Countertop Preparation

    Note: With engineered stone, none of these extra guidelines apply, as it is a much more uniform and generally stronger material. Heat lamps should not be used above any Incogneeto™ units, unless they are interlocked to prevent heating when a pan is not present, or damage to the disk may occur.
  • Page 8 Natural Stone or Engineered Stone Counter-top 1-1/4” (3.0 cm) stone with 3/4“ (2.0 cm) strips Unit sits up in-between strips Mount using TOP set of holes Holes for spring studs Look for “Antenna Side” (other sides not marked) Incogneeto Unit...
  • Page 9 “6 o'clock” The Incogneeto units can be mounted side be side with NO additional cooling clearance needed. However, the serving vessel on top can be the limiting factor for side-by-side installation, particularly if a chafer with a spoon holder is used.
  • Page 10: Using Your Induction Warmer

    Using Your Induction Warmer User Buttons Power button - Use this button to turn the unit on and off. A green LED will indicate when the unit is Lock button - Use this button to prevent users from adjusting settings. Pressing this button three times will lock the unit.
  • Page 11 Using Your Induction Warmer Programming Magneeto ● Starting with the unit off, hold the Down Arrow while pressing the Power button. ● The display will start with the text “CLR.” Use this to clear the tag (the unit will no longer enter auto mode).
  • Page 12 Using Your Induction Warmer Setting the Timer The Incogneeto units are equipped with a timer alarm that can be set to alert the operator when a pan has been on the unit for a period of time up to 240 minutes (4 hours).
  • Page 13: Care And Maintenance

    ● The induction unit antenna is located in the back of the unit. The wireless communicator tab must be positioned over the antenna. ● Use the Magneeto™ II ONLY with Incogneeto induction warmers and series 650 watt wireless communicator induction units. DO NOT use the Magneeto™...
  • Page 14: Troubleshooting

    Troubleshooting In the event of a possible malfunction, your induction warmer will display an error code on the alphanumeric display. Some models will beep a specific number of times, indicated by the error and flash the lights on the control box. Please consult the following table when encountering an error code.
  • Page 15 Clearly describe the problem that you are having. If you are unable to obtain the name of an authorized service agency, or if you continue to have service problems, contact Viking Range at (888) 845-4641 or write to: VIKING RANGE, LLC...
  • Page 16: Warranty

    Built-in induction warmers and all of their component parts, except as detailed below*†, are warranted to be free from defective materials or workmanship in normal residential use for a period of one (1) year from the date of original retail purchase. Viking Range, LLC, warrantor, agrees to repair or replace, at its option, any part which fails or is found to be defective during the warranty period.

Table of Contents