IMPORTANT SAFEGUARDS Before using this product please read this manual carefully and save for future reference. SAFETY INSTRUCTIONS When using any electric appliance, basic precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1.
Page 9
Sterilizing 1. Assemble the bottle and accessory tray as shown in the previous section. 2. Remove everything from the sterilizer. 3. Place water directly on the heating element (the metal part of the sterilizer). Different times require different amounts of water. See the table below: It is very important that you remove the bottle and accessory tray before pouring water onto the heating element.
Page 15
Troubleshooting, Tips, and FAQs Gradual Warm 1. My milk is too warm after using this feature. What should I do? a. If your milk is too warm, try using a lower setting next time. b. You can also remove the cover of the bottle while heating to slow the rate of heating.
Need help?
Do you have a question about the JBS-500 and is the answer not in the manual?
Questions and answers