Maintenance & Cleaning - ALDI WORKZONE DG75A User Manual

150W Bench Grinder
Determine the rotational speed range for working on zinc, zinc alloys,
aluminium and copper by trying it out on test pieces.
Use a low rotational speed for work on plastics and materials with a low
melting point.
Use a high rotational speed for working on wood.
Carry out cleaning, polishing and buffing work in the medium speed range.
If you exert too much pressure, the fitted tool can break and/or the
workpiece could be damaged. You will achieve optimum working
results by moving the tool over the workpiece at a steady speed and
while exerting light pressure.
9. Maintenance and cleaning
WARNING! RISK OF INJURY! Always pull out the plug before
adjustment, maintenance or repairing the appliance.
NOTE: Always clean the grinder immediately after finishing work.
Use a dry cloth to clean the housing.
Under no circumstances should you use fuel, detergents, solvents or
abrasive cleaners.
Ensure ventilation openings are always free.
Remove any adhering grinding dust with a brush.
Storage
Store the grinder in a dry and dust-free location.
Store the brushes somewhere dry and not in the vicinity of aggressive
media.
The grinding wheels must be stored in a dry location and should not
be stacked.
Store the accessories so they are protected from damage.
Store out of the reach of children.
AFTER SALES SUPPORT
1300 889 028
(toll free)
10275 ALDI IM Ed3.indd 19
MODEL No.: DG75A • 07/2019 • 10275
17
8/05/2019 2:50 PM