Page 1
AVer SVC Quick Installation Guide Package Contents Zoom Pre sentatio n Layout 1. Main System 10. HDMI Cable x 2 2. Camera 11. Camera Cable 3. Microphone 12. RJ-45 Cable 4.
Page 3
Press and hold will display broadcasting message. Enter Navigation Press and hold can switch EZDraw screen on buttons SVC screen view if EZDraw is connected with Video input Far/Near SVC system. Mute Press and hold can switch between number Volume +/- and character mode.
Page 4
Setup Wizard For the first time using AVer SVC system, the Installation Wizard will guide you to setup your SVC system step by step. After completing the wizard setup, user may start to use your SVC system. 1. Connect your SVC system well and turn on the power.
Page 5
Scenario 1 – Public IP Configuration (Outside of Firewall) Your SVC is connecting directly to the internet. Internet 1. From the remote press “Home” > > “Settings”. 2. Press > “Network”. 3. Select “LAN Configuration”. 4. And In the drop-down list “IP Address Type”, choose “Static IP”, “DHCP”...
Page 6
Scenario 2 –Private IP Configuration (Behind Firewall with Port Forwarding) Your SVC is connecting to the internet through a firewall. Firewall Internet 1. From the remote press “Home” > > “Settings”. 2. Press > “Network”. 3. Press “LAN Configuration”. 4. And In the drop-down list “IP Address Type”, choose “Static IP”.
Page 7
Scenario 3 – H.460 Gatekeeper with Firewall Traversal Your SVC is connecting to the internet through a firewall and you have a Gatekeeper outside the firewall. Firewall Internet Gatekeeper 1. From the remote press “Home” > > “Settings”. 2. Press >...
2. Video conference call is established but no video or voice. If you are connecting to AVer SVC with firewall, make sure you have done the port forwarding ‐ correctly. For non H.323 ALG firewall, please set the NAT configuration and the WAN IP address on AVer SVC system is entered.
Need help?
Do you have a question about the SVC and is the answer not in the manual?
Questions and answers