Advertisement
Quick Links
Jet Reel Operation Manual
The Jet reel is designed to hold up-to 600 feet of a soft cable. Can be
integrated with a Jetter assembly and a Jetter trailer/truck to inspect cleaned
lines of 6-18".
1. Setup
Note:
The system must be powered off and unplugged from 110VAC
of whenever connecting or disconnecting the Jetter adapter.
STANDARD PACKAGE INCLUDES:
600 Dekora Woods Blvd. Saukville, WI 53080
Toll Free: 800-488-8177
Local: 262-268-9330
Fax: 262-268-9952
Advertisement
Summary of Contents for INSIGHT Wl 53080
- Page 1 Jet Reel Operation Manual The Jet reel is designed to hold up-to 600 feet of a soft cable. Can be integrated with a Jetter assembly and a Jetter trailer/truck to inspect cleaned lines of 6-18”. 1. Setup Note: The system must be powered off and unplugged from 110VAC of whenever connecting or disconnecting the Jetter adapter.
- Page 2 Connect the Reel to the Command Module with the provided 10Ft/3M extension cable. Connect the Jetter adapter to the end of the jetter hose. Ensure that the correct nozzle configuration is used to maximize performance of the system. Connect the soft cable to the jetter adapter aligning the keyway of the connector.
- Page 3 cable could become tangled or come in contact with the interface box located at the bottom of the Reel. 3. Footage Counter. It will send a signal to the command module, which will be displayed on the monitor to indicate the amount of cable paid out of the reel. This device must be cleaned and lubricated with light oil (WD40) to maintain proper operation.