Recertification; Disclaimer - barfield SC 063 User Instruction Manual

E. Each new or re-certified unit is delivered with a Certificate (not pictured) that shows the
date when the unit was tested by the manufacturer, its serial number and when the next
certification is due. This certificate confirms that the unit performed according to its
specifications.

3. RECERTIFICATION

Barfield Sight Compass, Model SC 063, P/N 101-01200, has a one-year recertification
requirement. Qualified technicians in a shop equipped with the necessary tooling, facilities,
and Barfield-approved procedures must perform the maintenance required by this unit.

4. DISCLAIMER

BARFIELD, INC., neither a vendor nor supplier of airworthy compasses or an airframe
manufacturer, has no control over aircraft calibration and certification procedures. The
information provided in this Instruction Manual is presented as reference only, and therefore
the compass manufacturer calibration procedures and aircraft maintenance manual shall
take precedence over this Manual. However, the information presented is correct to the
best of our knowledge at the time of publication.
56-101-01200, Rev. D
September / 9 / 2010
SC 063 INSTRUCTION MANUAL
INTRO.
Page 3 of 20