Do you have a question about the EZI-FENCE and is the answer not in the manual?
Questions and answers
Summary of Contents for Stratco EZI-FENCE
Page 1
• Ezi-Fence Post Pack including installation details, component details • Ezi-Fence Bracket Kit and FAQs. Please contact Stratco if you have any • Ezi-Fence Base Plate Kit further questions relating to the product or the • Ezi-Fence Gate Box installation of your Ezi-Fence product.
Page 2
This kit contains 4 brackets and screws to mount one panel pickets to assemble a fence panel. To mount your panel you to either Ezi-Fence posts, existing posts, or other structures. will need to buy a Post Pack and Bracket Kit or just a Bracket You will need one bracket kit for each panel, irrespective of Kit, depending upon how you will be mounting your panel.
Page 3
EZI-FENCE POST PACK INSTALLATION CUSTOM POST SPACING INSTALLATION If you choose to use the Ezi-Fence post pack for your fence If you will be installing the panel between custom posts or run, you will need to space the posts at 74” centers as shown an existing structure, you will need to cut the fence railing to in the diagram below.
Page 4
*Please refer to your hinge kit details for gate opening allowances. JOINING FENCE RUN TO EXISTING WALL Ezi-Fence panels can be fixed to an existing wall simply by using the brackets in the same way as they would be fixed to Ezi-Fence posts.
Page 5
EZI-FENCE DESIGN GUIDE: EXAMPLES QTY IN DESIGN QTY OF BOXES REQUIRED QTY IN DESIGN QTY OF BOXES REQUIRED POSTS Post Pack (1 post per pack) POSTS Post Pack (1 post per pack) BRACKETS Bracket Kit (4 brackets per kit) FENCE PANELS...
« SCAN THIS QR CODE TO FIND A STRATCO NEAR YOU (407) 915-7442 stratcousa.com All brands and logos/images accompanied by ® or ™ are trade marks of Stratco (Australia) Pty Limited. ® Copyright May 2019...
Need help?
Do you have a question about the EZI-FENCE and is the answer not in the manual?
Questions and answers